Axis 570 User Manual page 55

Section 4: Setting Up - AS/400
54
Configuring the
AXIS 570/670
To perform the instructions presented in this section, you should first
assign an IP address to your AXIS 570/670 using one of the methods
presented in Assigning an IP address, on page 36.
If your network does not support the TCP/IP protocol suite, you
Note:
can still configure the AXIS 570/670 using the AXIS NetPilot
installation tool.
Follow the instructions below to configure the AXIS 570/670 using a
Web browser:
1. Start a Web browser, e.g. Internet explorer or Netscape
Navigator.
2. Enter the IP address or the host name of the AXIS 570/670 in the
location field and press the ENTER key on your keyboard. The
internal Web pages of the AXIS 570/670 appear. You may be
asked to enter a user name and a password. The default values are
root and pass, respectively.
3. Click the Configuration button.
4. Select SNA from the header.
5. Select 5494 from the 3174/5494 Emulation Parameter drop-
down list.
6. Enter the
7. Enter the
Name text field.
8. Enter the
text field.
9. Enter the
field.
10. Enter the
text field and click the Submit SNA settings button.
Depending on your choice of data streams, continue the installation
by selecting the appropriate set of instructions on page 55.
in the Local SAP value text field.
SSAP
Local network ID
Local adapter address
Local network ID
Default local location
AXIS 570/670 User's Manual
in the Local 5494 Network
in the Host MAC address
in the Host Network Name text
in the Host LU Name