Section 10: Setting Up - Unix; Installation In The Unix Environment - Axis 570 User Manual

AXIS 570/670 User's Manual
Section 10Setting Up - UNIX

Installation in the UNIX Environment

SNA
Having performed the basic TCP/IP setup procedures as defined in
Assigning an IP address, on page 36, you are now able to print in
interactive mode using LPR, FTP or Reverse Telnet protocols.
However, should you require to integrate the AXIS 570/670 into your
host spooler, you can use the Axis automatic installation script
axinstall. This utility software is resident on the AXIS 570/670 and
can be downloaded to your host using FTP, so no disks are required.
The axinstall script is also available on the AXIS Online CD. Having
completed this operation, the printer connected to the AXIS 570/670
will appear as though they are directly connected to the host printer
spooler.
If you intend to operate your AXIS 570/670 in a multiprotocol
environment, you should also proceed according to one or more of the
following sections, as appropriate to your network.
Section 4 Setting Up - AS/400, on page 49
Section 5 Setting Up - IBM Mainframe, on page 87
Section 6 Setting Up - NetWare, on page 115
Section 7 Setting Up - Windows, on page 123
Section 8 Setting Up - OS/2, on page 145
Section 9 Setting Up - Macintosh, on page 149

Section 10: Setting Up - UNIX

155