Axis 570 User Manual page 85

Section 4: Setting Up - AS/400
84
Creating a virtual
controller
Creating a virtual
Follow the steps below to create a virtual printer:
1. Enter the command CRTCTLVWS. A dialog panel similar to the
example below will be displayed.
2. Press F11 to display keywords.
3. Enter the controller name at the Controller
description (CTLD) line, e.g. AXIS570.
4. Press the ENTER key to create the virtual controller.
Example:
Create Ctl Desc (Virtual WS) (CRTCTLVWS)
Type choices, press Enter.
Controller description . . . . CTLD
Online at IPL
Text description . . . . . . . TEXT
Follow the steps below to create a virtual printer:
printer
1. Issue the command CRTDEVPRT. A dialog panel similar to the
example on page 86 will be displayed
2. Press F11 to display keywords.
3. Enter the printer name at the Device description
(DEVD) line. The printer name provided must be the same as
the Output queue (OUTQ), previously defined above when
creating the output queue. This name is later used as destination
when sending print jobs to the AXIS 570/670.
4. Type *VRT at the Device class (DEVCLS) line, to
define the AXIS 570/670 as a virtual printer.
5. With reference to the table below, enter the appropriate Device
type (TYPE) and Device Model (MODEL).
AXIS 570/670 User's Manual
. . . . . . . . ONLINE
> AXIS570
*YES
*BLANK