Axis 570 User Manual page 112

AXIS 570/670 User's Manual
Note:
Verifying the Communication:
Follow the steps below to test the communication by sending a print
job to the AXIS570/670.
1. Make sure the printer is connected to the AXIS 570/670 and the
corresponding LU in the host is activated.
2. Send a print job from the host.
The AXIS 570/670 is now ready for use. If needed, it can be further
adapted to your system using the AXIS NetPilot™, Web-based
configuration pages or IBM Printer Emulation (see Appendix C -
Extended IBM Printer Emulation).
You can check the status of the TN3270E connection by printing
a test page from the Print Server. This is done by pressing the test
button once. Make sure the TN3270E status (St:) line for your
server connection is defined as either:
• SSCP
• LU-1
• LU-3
For additional information about configuring other TN3270E
servers, refer to the Technical Notes via the AXIS Web pages.
Section 5: Setting Up - IBM Mainframe
111