Appendix C: Extended IBM Printer Emulation
224
AXIS Cobra products
compatibility
command in your document. To print bar codes, bar code commands
may be included anywhere in your documents. They begin with
'percent-slash' (
) followed by the word BAR. Then follows the
%/
number of the bar code definition to be used, a comma, and the
sequence to be printed. The command is ended by a semi-colon (;).
Example 1:
Setting up the bar code parameters and printing bar codes.
%CONFIG+
BAR 0 = EAN8,12,4,ON;
BAR 1 = EAN8,12,8,ON;
SAVE;
%CONFIG-
%/BAR 0,"0123456"; %/BAR 1,"0123456";
Example 2:
Once the BAR parameter has been set up, you will only need to
use the bar code commands to print the bar codes.
%/BAR 0,"0123456";
Resulting printout:
0123 4565
The AXIS 570/670 supports a subset of the AXIS Cobra products'
extended printer emulation syntax, including the bar codes syntax.
Please refer to the Technical Reference for more information.
AXIS 570/670 User's Manual
%/BAR 1,"0123456";
0123 4565