Axis 570 User Manual page 61

Section 4: Setting Up - AS/400
60
Creating a Printer
Device Description
Example:
Create Ctl Desc (Remote WS) (CRTCTLRWS)
Type choices, press Enter.
Controller description . . . . . CTLD
Controller type . . . . . . . . TYPE
Controller model . . . . . . . . MODEL
Link type . . . . . . . . . . . LINKTYPE
Online at IPL . . . . . . . . . ONLINE
Switched line list . . . . . . . SWTLINLST
+ for more values
Maximum frame size . . . . . . . MAXFRAME
Exchange identifier
Initial connection . . . . . . . INLCN
Dial initiation . . . . . . . . DIALINIT
LAN remote adapter address . . . ADAPTADR
Autocreate device. . . . . . . . AUTOCRTDEV
Text 'description' . . . . . . . TEXT
F3=Exit F4=Prompt
F13=How to use this display
Follow the steps below to create a printer description:
1. Type CRTDEVPRT on the command line.
2. Press F11 to display keywords.
3. Enter *RMT as Device class (DEVCLS).
4. Enter 3287 as the desired Device type (TYPE).
5. Enter 0 as the Device model (MODEL).
6. Define the Attached controller (CTL). This should be
set to the name of the previously defined Controller description.
7. In the LU definition, define the Local Location
Address (LOCADDR). This number must map to the Logical
Printer number of the AXIS 570/670.
. . . . . . EXCHID
F5=Refresh F10=Additional parameters
F24=More keys
AXIS 570/670 User's Manual
> CTL670
> 3174
> 0
> *LAN
*YES
> ssssssss
*LINKTYPE
*DIAL
*LINKTYPE
xxxxxxxxxxxx
*ALL
'Controller for AXIS 670'
F12=Cancel
Bottom