Axis 570 User Manual page 40

AXIS 570/670 User's Manual
Using DHCP
Note:
Follow the instructions below to download the IP address using
DHCP:
1. Edit or create a scope in the DHCP manager of the DHCP
daemon. The entries included in this scope should contain the
following parameters:
• range of IP addresses
• subnet mask
• default router IP address
• WINS server IP address(es)
• lease duration
2. Activate the scope.
The AXIS 570/670 automatically downloads the DHCP parameters.
If you are using WINS, you must include at least one WINS server IP
address in the DHCP scope. Immediately after the IP address has been
received, the AXIS 570/670 registers its host name and IP address on
the WINS server.
The AXIS 570/670 can automatically download a customized config
file from a TFTP server. Just add the name of the config file and the
TFTP server's IP address to your DHCP scope. The config file is
downloaded immediately after the AXIS 570/670 receives its IP
address.
You do not have to restart the AXIS 570/670 to download the IP
address.
Section 3: Basic Installation
39