Axis 570 User Manual page 81

Section 4: Setting Up - AS/400
80
Configuring the
AS/400 Host System
7. Click the Submit IBM BASIC CONFIGURATION settings
button.
8. Select IBM PRINTER DRIVER from the header.
9. Make sure that the Printer Driver parameter matches the printer
driver of your printer and click the Submit IBM PRINTER
DRIVER settings button.
10. Select IBM PAGE FORMAT from the header.
11. Select the appropriate page properties and click the Submit IBM
PAGE FORMAT settings button.
12. Select TCP/IP from the header.
13. Make sure that the TCP/IP parameters are set to match your
needs.
The AS/400 setup consists of four steps:
• Adding the AXIS 570/670 IP address to the AS/400 TCP/IP host
table.
• Creating an output queue.
• Creating a virtual controller.
• Creating a virtual printer.
Many of the settings presented in the following panel example can be
left at their default settings. However, the settings that you must
change are highlighted in bold text and the settings that you must
enter exactly as shown in the example are highlighted in bold
underlined text.
AXIS 570/670 User's Manual