AXIS 540/640 User's Manual
Installation Guide
Installation Methods
Environment
Network Configuration
NDPS (Pure IP)
Standard NetWare
(Pure IP)
NetWare
NDPS (IPX)
Standard NetWare (IPX)
Advanced configuration
(IPX)
TCP/IP
Windows
NetBIOS/NetBEUI
TCP/IP
OS/2
NetBIOS/NetBEUI
Macintosh(*)
AppleTalk
UNIX
TCP/IP
The method of installation that you choose should be dictated by your
printing requirements and your supported network environments.
Select the appropriate installation method from the table below:
Action
See Assigning an IP address, on page 31
See Setup using NDPS, on page 45
See Assigning an IP address, on page 31
See Basic Queue-based Printing (Pure IP), on
page 52
See Setup using NDPS, on page 45
See Basic Setup with AXIS NetPilot, on page 27
See Basic Setup with AXIS NetPilot, on page 27.
Proceed with Advanced Installation using AXIS
NetPilot, on page 48
See Section 5 Setting Up - Windows, on page 55
See Section 5 Setting Up - Windows, on page 55
See Assigning an IP address, on page 31
Proceed with Section 6 Setting Up - OS/2, on
page 81
See Section 6 Setting Up - OS/2, on page 81
See Section 7 Setting Up - Macintosh, on page 87
See Assigning an IP address, on page 31
Proceed with Section 8 Setting Up - UNIX, on
page 93
*
Macintosh is not supported by the AXIS 640 and AXIS 642
models.
Section 3: Basic Installation
25