Axis 570 User Manual page 214

AXIS 570/670 User's Manual
Changing Parameters
after Auto-
configuration
Syntax:
<Parameter name> = <value> [, <value>];
When all parameters have been set the
settings permanently. The
printing. In order to maintain backward compatibility, some
parameters must be preceded by a
"Appendix I - The Parameter List" on page 263.
Example:
To set the parameters to their default values, enter the following
in your document and print it.
%CONFIG+ password
password (pass), the password is optional.)
PRDRIVER = PCL5;
%CONFIG++
NODE_SAP = 4;
H1_SAP = 4;
AUTODIAL = NO;
%CONFIG--
PREMUL = 3816;
SYSL = 37;
BIN1 = LETTER, COR;
SAVE;
%CONFIG-
If you want to change some of the critical configuration parameters
after auto-configuration is completed, you should first set
AUTODIAL to NO, then remove all descriptions in the AS/400, and
then change the parameter(s) and set AUTODIAL to YES to initiate a
new configuration process.
Appendix A: SNA Parameter Overview
command saves the
SAVE
command resumes normal
%CONFIG-
%CONFIG++
(If you have not changed the default
command. See also
213