Casablanca C19xxxK Owner's Manual page 13

Blade Installation
Step 11. Attach a blade/blade iron assembly to the
blade ring by using two blade iron screws provided.
Place the end of the blade iron on the blade holder
adapter ring as shown in Figure #4. Insert the screws
one by one using the provided screwdriver. Tighten
securely by hand only. Repeat for each blade/blade
iron assembly until all five blades are attached to the
fan as shown in Figure #5.
CAUTION:
Blade screws must be tightened securely
before operating the fan.
Heritage II
TM
BLADE HOLDER
ADAPTER RING
BLADE IRON SCREW
Figure #4
Figure #5
BLADE / BLADE
IRON ASSEMBLY
13