Casablanca C19xxxK Owner's Manual page 8

Step 1c. After routing the outlet box wires through the
rubber gasket and the mounting plate, route the outlet
box wires along side of the crossbar mounting bracket
as shown in Figure #3. Attach the crossbar mounting
bracket to the outlet box with the screws provided. First
you will need to make a hole in the rubber gasket for
the screws before attaching the crossbar mounting
bracket to the outlet box. Make sure the outlet box
wires are not pinched by the washer.
CAUTION:
To reduce the risk of personal injury, use
only the mounting hardware provided
with the approved outlet box to install the
crossbar mounting bracket.
WARNING!
Support directly to building structure only.
8
JOIST
GREEN
GROUND WIRE
Figure #3
CROSSBAR
MOUNTING
BRACKET
WASHERS
1" x 8-32
ROUNDHEAD
SCREWS