Gold's Gym GR 7000 GGBE6974.1 User Manual page 22

51. Attach the Bench Stabilizer (108) to the Bench
Frame (107) with two M8 x 76mm Carriage Bolts
(143) and two M8 Nylon Locknuts (78). Do not
tighten the Nylon Locknuts yet.
52. Attach the Leg Bumper (135) to the Front Leg
(109) with an M4 x 16mm Screw (82).
Attach the Front Leg (109) to the Bench Frame
(107) with two M10 x 73mm Hex Bolts (105), two
M10 Washers (84), and two M10 Nylon Locknuts
(79).
See steps 51 and 52. Tighten the M8 Nylon
Locknuts (78) and the M10 Nylon Locknuts
(79).
53. Apply a small amount of the included grease to
an M10 x 82mm Button Bolt (106). Attach the Leg
Lever (110) to the Front Leg (109) with the Button
Bolt and an M10 Nylon Locknut (79). Do not
overtighten the Nylon Locknut; the Leg Lever
must pivot easily.
51
52
109
135
82
53
110
22
78
107
108
143
105
84
107
79
109
79
Grease
106