Gold's Gym GR 7000 GGBE6974.1 User Manual page 16

27. Identify the Low Cable (72). Route the Cable
through the Backrest Upright (8) and under a
110mm Pulley (59). Attach the Pulley inside the
Upright with an M10 x 93mm Button Bolt (97),
two M10 Washers (84), two 25mm Spacers (55),
and an M10 Nylon Locknut (79).
28. Route the Low Cable (72) over a 90mm Pulley
(58). Attach the Pulley and two Half Finger
Guards (40) to the Double "U"-bracket (46) with
an M10 x 46mm Button Bolt (100) and an M10
Nylon Locknut (79).
29. Route the Low Cable (72) under a 90mm Pulley
(58). Attach the Pulley and two Half Finger
Guards (40) to the Center Base (2) with an M10 x
46mm Button Bolt (100) and an M10 Nylon
Locknut (79).
30. Wrap the Low Cable (72) over a 90mm Pulley
(58). Attach the Pulley, a Small Cable Trap (63),
and two Half Finger Guards (40) to the second
hole from the bottom of the two Pulley Plates (74)
with an M10 x 53mm Button Bolt (147) and an
M10 Nylon Locknut (79). Make sure that the
Cable Trap is oriented to hold the Cable in the
groove of the Pulley.
27
8
72
55
84
97
28
100
29
58
40
2
79
30
74
40
147
16
79
84
55
59
79
40
46
40
58
72
72
100
40
79
40
74
63
58
72