47. Attach an Arm Pad (30) to the Right Arm (11) with
two M6 x 77mm Screws (87) and two M6
Washers (86). Attach the other Arm Pad (30) to
the Left Arm (10) in the same manner.
48. Slide two Weight Bumpers (37) onto the Left
Support (6). Make sure that the flat edge of
each Weight Bumper is facing the outside of
the Left Support.
Slide two Weight Bumpers (37) onto the Right
Support (not shown).
49. Set a Weight Rest (35) and a Safety Spotter (36)
onto the Left Upright (3). Set the other Weight
Rest and the other Safety Spotter onto the
Right Upright (not shown) at the same
heights.
50. Attach two Small Foot Plates (50) to the Bench
Stabilizer (108) with four M4 x 10mm Screws
(95).
47
11
86
87
48
37
6
49
36
50
50
95
21
10
30
37
35
3
108
50
95
30