Gold's Gym GR 7000 GGBE6974.1 User Manual page 19

39. Route the Long Cable (54) over a 90mm Pulley
(58). Attach the Pulley, a Small Cable Trap (63),
and two Half Finger Guards (40) to the lower hole
of the "U"-bracket (47) with an M10 x 53mm
Button Bolt (147) and an M10 Nylon Locknut (79).
Make sure that the Cable Trap is oriented to
hold the Cable in the groove of the Pulley.
40. Route the Long Cable (54) under a 90mm Pulley
(58). Attach the Pulley and two Half Finger
Guards (40) to the Center Base (2) with an M10 x
46mm Button Bolt (100) and an M10 Nylon
Locknut (79).
41. Route the Long Cable (54) around a 110mm
Pulley (59). Attach the Pulley, a Long Cable Trap
(62), an M10 Washer (84), and a Large Full
Finger Guard (150) to the Center Base (2) with
an M10 x 76mm Button Bolt (102) and an M10
Nylon Locknut (79). Make sure that the Cable
Trap is oriented to hold the Cable in the
groove of the Pulley.
42. Route the Long Cable (54) under a 90mm Pulley
(58). Attach the Pulley and two Half Finger
Guards (40) to a Base (1) with an M10 x 46mm
Button Bolt (100) and an M10 Nylon Locknut (79).
39
147
40
63
40
54
100
40
41
42
40
100
19
47
40
79
58
54
58
40
2
79
102
150
84
59
54
62
2
79
58 79
54
1
40