Gold's Gym GR 7000 GGBE6974.1 User Manual page 15

23. Wrap the High Cable (73) under a 90mm Pulley
(58). Attach the Pulley, a Small Cable Trap (63),
and two Half Finger Guards (40) to the two Pulley
Plates (74) with an M10 x 53mm Button Bolt
(147) and an M10 Nylon Locknut (79). Make sure
that the Small Cable Trap is oriented to hold
the Cable in the groove of the Pulley.
24. Wrap the High Cable (73) over a 90mm Pulley
(58) and over the indicated rod in the Top Frame
(16). Attach the Pulley to the Top Frame with an
M10 x 42mm Button Bolt (96) and an M10 Nylon
Locknut (79).
25. Wrap the High Cable (73) over a 90mm Pulley
(58). Attach the Pulley to the Top Frame (16) with
an M10 x 42mm Button Bolt (96) and an M10
Nylon Locknut (79).
26. Attach the High Cable (73) inside of the Weight
Carriage (41) with an M10 x 67mm Button Bolt
(90), two M10 Washers (84), two 24mm Spacers
(45), and an M10 Nylon Locknut (79).
Attach the lower Carriage Bushing (42) inside the
Weight Carriage (41) with an M10 x 67mm Button
Bolt (90), two M10 Washers (84), a 51mm Spacer
(44), and an M10 Nylon Locknut (79).
23
73
40
147
74
24
25
26
90
84
15
40
79
74
63
58
79
96
Rod
16
58
73
79
16
96
73
58
73
45
41
84
79
45
44
84
79
42