Gold's Gym GR 7000 GGBE6974.1 User Manual page 18

35. Route the Long Cable (54) over a 90mm Pulley
(58). Attach the Pulley and a Small Cable Trap
(63) to the left Side Top Frame (13) with an M10 x
49mm Button Bolt (104) and an M10 Nylon
Locknut (79). Make sure that the Cable Trap is
oriented to hold the Cable in the groove of the
Pulley.
36. Route the Long Cable (54) under a 90mm Pulley
(58). Attach the Pulley and two Half Finger
Guards (40) to a Base (1) with an M10 x 46mm
Button Bolt (100) and an M10 Nylon Locknut (79).
37. Route the Long Cable (54) around a 110mm
Pulley (59). Attach the Pulley, a Long Cable Trap
(62), an M10 Washer (84), and a Large Full
Finger Guard (150) to the Center Base (2) with
an M10 x 76mm Button Bolt (102) and an M10
Nylon Locknut (79). Make sure that the Cable
Trap is oriented to hold the Cable in the
groove of the Pulley.
38. Route the Long Cable (54) under a 90mm Pulley
(58). Attach the Pulley and two Half Finger
Guards (40) to the Center Base (2) with an M10 x
46mm Button Bolt (100) and an M10 Nylon
Locknut (79).
35
79
13
36
40
79
37
150
62
38
100
40
18
54
58
104
63
54
58
40
100
1
102
84
59
54
2
79
58
2 40
79
54