Table of Contents
Advertisement
64
Electrical Connection
Problem
"d" is lit in the display
and the oven is not heat-
ing up. Fan not operating
If you are unable to remedy the problem by following the above suggestions,
please contact your dealer or the Customer Care Department.
WARNING!
Repairs to the appliance must only be carried out by qualified service engineers.
Considerable danger to the user may result from improper repairs.
In the event of incorrect operation, visits by engineers from Customer Service or
the dealer may be chargeable, even during the warranty period.
Information for appliances with metal fronts: Due to the cool front of your appli-
ance, there may be short-term condensation of the inner door glass after opening
the door, during or shortly after baking or roasting.
Electrical Connection
The oven is designed to be connected to 230-240V~(50Hz) electricity supply.
The oven has an easily accessible terminal block which is marked as follows:
Letter L - Live terminal
Letter N - Neutral terminal
- Earth terminal
CAUTION!
This oven must be earthed!
The cable used to connect the oven to the electrical supply must comply to the
specifications given below.
For UK use only
Connection via
Cooker Control Circuit 2,5 mm²
Possible cause
Test mode is switched on
Min. size Cable/flex
Switch off the appliance. Press and
hold the
same time, until signal sounds and
"d" display goes out.
Cable/flex type
PVC/PVC twin and
earth
Remedy
and
buttons at the
Fuse
min: 15 A
max: 20 A
Advertisement
Table of Contents
