NetComm HS1200N User Manual page 46

External RADIUS Related Settings
802.1X Authentication: Enable /Disable 802.1X authentication for users authenticated through this Server.
Username Format: Select the format of the user login information required to be sent to the external RADIUS Server.
You may choose to send the username in Complete (userID + Postfix), Only ID or Leave Unmodified. Please note that if
the Leave Unmodified option is selected, the system will send the input as is.
NAS Identifier: This attribute is the string identifying the NAS originating the access request. System will send this value
to the external RADIUS server, if the external RADIUS server needs this.
NAS Port Type: Indicates the type of physical port the network access server is using to authenticate the user. System
will send this value to the external RADIUS server, if the external RADIUS server needs this.
Account Delay Time: This attribute adds flexibility for the gateway to process accounting requests in the time specified.
Default is set at 0.
Service Type: This attribute indicates the type of service the user has requested or the type of service to be provided,
required for some RADIUS servers that only accepts specified service types.
Class-Group Mapping: This function is to impose a Group on a RADIUS class attribute sent from the RADIUS server.
When the clients classified by RADIUS class attributes log into the system via the RADIUS server, each client will be
mapped to an assigned Group.
DM & CoA Settings: This function allows administrator to assign users to receive Disconnect Messages / Change of
Authorization from the server and sessions can be terminated instantly. Click Configure to enter the IP addresses of the
users.
Attributes Priority: This section shows the Standard RADIUS attributes which include Session Timeout, Idle Timeout
and Acct Interim Interval; and WISPr Vendor Specific Attributes. These attributes are predetermined, and if needed,
choose Overwrite Server's Setting to make changes.
Primary / Secondary RADIUS Server
Authentication Server: Enter the domain name or IP address of your RADIUS Server.
Authentication Port: Enter the Port number used for authentication.
Accounting Port: Enter the Port number used for accounting.
Authentication Secret Key: Secret Key used for authentication.
Accounting Service: Enable / Disable RADIUS accounting.
Accounting Server: Enter the domain name or IP of your accounting server
Authentication Protocol: Select Challenge-Handshake Authentication Protocol (CHAP) or Password Authentication
Protocol (PAP).
Accounting Secret Key: The key between the RADIUS server and the gateway to test the authenticity of the link.
NetComm Wireless HS1200N Wireless N Hotspot
46
www.netcommwireless.com