VSA configuration in RADIUS server (FreeRADIUS)
This section will guide you through VSA configuration with FreeRADIUS v1.0.5 running on "Fedora". Before getting started, open the
shell of RADIUS server; for example, use Putty to access the Linux host:
Step 1
Confirm the following key elements in the RADIUS server: users, groups
Verify whether there are already users in the RADIUS Server.
Verify whether there are already Groups and assigned users belonging to these Groups in the RADIUS Server.
Step 2
Log in to the Linux host of the RADIUS server.
Step 3
Create a file "dictionary.HSG" under the "freeradius" folder.
Step 4
Edit and save the contents of the file "dictionary.HSG" as follows:
Administrator can also add other attributes as the table stated in Section 2 with the same format.
www.netcommwireless.com
NetComm Wireless HS1200N Wireless N Hotspot
117