System Management And Utilities; System Time - NetComm HS1200N User Manual

System Management and
Utilities

System Time

To configure System Time, go to: System >> General.
NTP (Network Time Protocol) communication protocol can be used to synchronize the system time with remote time server. Please
specify the local time zone and the IP address of at least one NTP server for adjusting the time automatically (Universal Time is
Greenwich Mean Time, GMT).
Manual setup is another option to set up the system time, if you choose to set up the system time manually, please enter the Year,
Month, Day, the current time and click Apply to activate the changes.
NTP Server Mode: When Enabled, Access Points and devices in the Local Area Network of the gateway would be able
to use the gateway as a NTP Server for time reference.
Note: When system can not sync the time with NTP server, all clients will not be allowed to log in to system and On-demand
accounts cannot be created.
www.netcommwireless.com NetComm Wireless HS1200N Wireless N Hotspot
77