Syslog; Ftp - NetComm HS1200N User Manual

SYSLOG

SYSLOG Server Settings: There are 9 types of SYSLOG supported: Users Log, On-demand Users Log, Roaming Out Users Log,
Roaming In Users Log, Session Log, Firewall Log, Local HTTP Web Log, HTTP Web Log and DHCP Server Log. Enter the IP
address and Port number to specify the SYSLOG server where the report should be sent to.
Except for System Log, each supported log may be assigned Tag information as well as SYSLOG standard attributes Severity to
meet the filtering requirements on the SYSLOG Server. HTTP Web Log can further select which Service Zone Web interface
information to log. For each type of log information, whenever an incident occurs and data is updated, the updated log will be
immediately sent to the configured SYSLOG server.
Note: When the number of a user's session (TCP and UDP) reaches the session limit specified in the policy, a record will be logged
to this SYSLOG server.

FTP

This configuration page allows the setting of FTP Server to send, including the types of Roaming Out Users Log, Roaming In Users
Log, On-demand User Billing Report, Session Log, Local HTTP Web Log, HTTP Web Log, WMI Configuration Log, DHCP Lease
Log, Traffic Report, User Log or On-demand User Log based on Server Folder and Interval.
FTP Server Settings
FTP Destination: Configures the common settings of the FTP server that the logs will be sent to. Further settings can be configured
under Notification Settings, which includes the following:
IP Address/Port: IP address and port number of FTP server.
Anonymous: Check option "Yes" if the FTP server does not need ID credentials, otherwise check option "No" and fill in the
necessary Username and Password.
FTP Setting Test: To test if the FTP settings are correct or not.
User Log: Records the User Log of the system to a specific FTP server.
On-demand User Log: Records the On-demand User Log of the system to a specific FTP server.
Roaming Out / In Users Log: Records the Roaming Out / In Users Log to a specific FTP server.
Session Log: Log each connection created by users and track the source IP/Port and destination IP/Port. Session Log will be sent
to the FTP server automatically in every defined interval in Session Log email notification. Session Log allows uploading the log file to
a FTP server periodically. The maximum log file size is 256K. The log file will also be sent to the FTP server once the file size reaches
its maximum size.
On-demand User Billing Report: Records the On-demand User Billing Report to a specific FTP server.
Local HTTP Web Log / HTTP Web Log: Records the URL of websites visited by users accessing the internet via the gateway to a
specific FTP server.
WMI Configuration Log: Records the WMI Configuration Log of the system to a specific FTP server.
DHCP Lease Log: Records the DHCP Lease Log of the system to a specific FTP server.
Traffic Report: Records the Traffic Report of the system to a specific FTP server.
NetComm Wireless HS1200N Wireless N Hotspot
104
www.netcommwireless.com