Hardware Overview; Wireless N Hotspot - NetComm HS1200N User Manual

Hardware overview

Wireless N Hotspot

Front Panel
NUMBER
1 Quick button
2 WES button
NUMBER
3
4
5
6
7
8
9
NetComm Wireless HS1200N Wireless N Hotspot
8
BUTTON
Press this button to quick print an account generated from billing plan 1.
Press and hold over 5 seconds to initiate Master Mode for the WES process.
Press and release to initiate Slave Mode for the WES process.
LED
Power
When illuminated, the device is on and correctly powered.
Status When illuminated, the system is ready.
Wireless When illuminated, this wireless LED indicates that the network interface is ready for service.
Illuminates in orange to indicate that the WAN port is connected to a 1000Mbps link
WAN
Illuminates in green to indicate that the WAN port is connected to a 10/100Mbps link
Illuminates in orange to indicate that the LAN port is connected to a 1000Mbps connection.
LAN1 – LAN4
Illuminates in green to indicate that the LAN port is connected to a 10/100Mbps connection.
USB
Reserved for future use.
WES Start
WES Negotiate
WES
WES Timeout
WES Success
WES Fail
DESCRIPTION
DESCRIPTION
MASTER SLAVE
LED Blinks Slowly (Green) LED Blinks Slowly (Red)
Blinking normally (Green) Blinking normally (Red)
LED On (Green) LED On (Red)
LED On (Red) LED On (Green)
LED On (Green) LED On (Red)
www.netcommwireless.com