Multiple Login
To configure Multiple Login, go to: Users >> Additional Control.
When enabled, a user can log in from different computers with the same account. (This function doesn't support On-demand
users.)
Networking Features of a Gateway
IP Plug and Play
To configure IP Plug and Play, go to: Network >> Client Mobility.
The gateway supports IP PNP function. A user can log in and access network with any IP address setting.
This function is disabled in default settings.
When IP PNP is enabled, at the user end, a static IP address can be used to connect to the system. Regardless of what the IP
address at the user end is using, authentication can still be performed through the gateway.
Note: To apply for free Dynamic DNS service, you may go to http://www.dyndns.com/services/dns/dyndns/howto.html
www.netcommwireless.com
NetComm Wireless HS1200N Wireless N Hotspot
75