Appendix B: Wds Management - NetComm HS1200N User Manual

Appendix B: WDS Management

The Public Zone of the gateway supports up to 2 WDS links. WDS (Wireless Distribution System) is a function used to connect APs
(Access Points) wirelessly to extend wireless coverage. The WDS management function of the system can help administrators to
setup two WDS links.
To configure WDS, go to: System >> Service Zones, click Configure in Public zone.
WDS (Wireless Distribution System) is a function used to connect APs (Access Points) wirelessly. The WDS management function of
the system can help administrators to setup two WDS links.
WDS Status: Select Enable to activate this WDS link.
MAC Address of Remote AP: Enter the MAC of the remote AP that generates a WDS link with the gateway.
Security Type:
WEP: WEP Key Length may be 64 bits, 128 bits or 152 bits; and WEP Key Format can be ASCII or HEX. Enter the applicable WEP
Key.
WPA-PSK: Select the preferred ciphering method, TKIP or AES and enter the PSK / Pass-phrase.
NetComm Wireless HS1200N Wireless N Hotspot
112
www.netcommwireless.com