Group; Policy - NetComm HS1200N User Manual

After the Black List editing is completed. You can select the Black List in each Authentication Server to make the list effective.

Group

To configure Group, go to: Users >> Group.
Users on the gateway can be classified into different groups, which can be assigned different Policies and Schedules. The gateway
supports up to 5 user Groups.
When the type of authentication database is RADIUS, the Class-Group Mapping function will be available to allow the administrator
to assign a Group for a RADIUS class attribute; therefore, a Group will be mapped to a user of a RADIUS class attribute.

Policy

To configure Policy, go to: Users >> Policy.
The gateway supports multiple Policies, including one Global Policy and 5 individual Policies.
Global Policy is the system's universal policy and is applied to all clients unless the clients are bound by another policy. Individual
Policy can be defined and applied to a different authentication server. A client logging in with this authentication server will be bound
by the corresponding Policy. If no policy is applied to the authentication server, its users will be governed by the Global Policy.
Global Policy
Global policy is the system's universal policy containing the Firewall Profile, Specific Routes Profile (IPv4/IPv6), and Privilege Profile,
which will be applied to all users unless the user has been regulated by another individual Policy.
Select Policy: Select a desired policy profile to configure.
Firewall Profile: Global policy and policy 1 ~ 5 all have a firewall service list and a set of firewall profiles which is composed of firewall
rules.
Specific Route Profile: When Specific Routes are configured here, all clients applied with this policy will access the specific
destination through these gateway settings.
Specific IPv6 Route Profile: The routing rules to be applied to users using IPv6 under this policy may be configured here.
NetComm Wireless HS1200N Wireless N Hotspot
58
www.netcommwireless.com