Table of Contents
Advertisement
Getting Started
The HS1200N offers a web based configuration page. After completing the hardware installation above, the HS1200N can be
configured through a computer using a web browser with JavaScript enabled.
The default LAN IP addresses are:
LAN1 and LAN2: 192.168.110.1 – These are mapped to the Private Zone; user authentication is not required to access network
resources.
LAN3 and LAN4: 192.168.120.1 – These are mapped to the Public Zone; user authentication is required to access network
resources.
Note: The following instructions use the administration computer connected to the LAN1 port.
Configuration Steps
Once the hardware installation steps are complete, set your computer to "Obtain an IP address automatically" in the TCP/IP settings
when logged in to the PC as an administrator. If you have not modified your TCP/IP settings, it should already be configured in this
way.
Connect one end of the provided Ethernet cable to the PC and the other end to LAN port 1.
Open a web browser and type
Note: Use "https" for a secure connection.
For the first time, if the HS1200N is not using a trusted SSL certificate, there will be a "Certificate Error". This is because the
browser treats the HS1200N as an untrusted website. Please press "Continue to this website" to continue.
If you are unable to see the login screen verify your computer is configured to obtain an IP address automatically. You can
also try using a static IP address such as 192.168.110.xxx (where xxx is a number between 2 and 254) and then try loading
the page again. For assistance configuring your computer, please refer to Appendix A: Network Configuration on a
Computer.
The following login page appears. Enter admin in both the username and password fields then click the Login button to continue.
www.netcommwireless.com
https://192.168.110.1
or
http://192.168.110.1
in the address field and press Enter.
NetComm Wireless HS1200N Wireless N Hotspot
15
Advertisement
Table of Contents
