Table of Contents
Advertisement
System Related Logs
To configure System related logs, go to: Status >> Logs.
This page displays the system's local log information since system boot up. Administrators can examine the log entries of various
events. However, since all these information are stored on volatile memory, they will be lost during a restart/reboot operation.
Therefore if the log information needs to be documented, the administrator will need to make back up manually.
System Log
This page displays system related logs for event tracing.
Web Log
This page shows which of the web pages have been accessed on the gateway's built-in web server.
UAMD Log
This page displays the UAM related information output from the UAM daemon.
RADIUS Server Log
This page displays the RADIUS messages that pass through the gateway.
On-demand Billing Report Log
This page displays a summary of On-demand account transactions.
Configuration Change Log
This page shows the account and IP of the user that has made configuration changes to the gateway.
DHCP Lease
To configure DHCP Lease related logs, go to: Status >> DHCP Lease.
The DHCP IP lease statistics can be viewed after clicking on Show Statistics List in this page.
Statistics of offered list
Valid lease counts of the Last 10 Minutes, Hours and Days are shown here. The header 1 ~ 10 are the unit multipliers. For instance
the number under column 2 indicates the lease count in the last 20 minutes/hours/days, the number under column 3 indicated the
lease count in the last 30 minutes/hours/days and so on.
Statistics of expired list
IP leased to clients that have expired in the Last 10 Minutes, Hours and Days are shown here. The header 1 ~ 10 are the unit
multipliers. For instance the number under column 2 indicates the expired count in the last 20 minutes/hours/days, the number
under column 3 indicates the expired count in the last 30 minutes/hours/days and so on.
www.netcommwireless.com
NetComm Wireless HS1200N Wireless N Hotspot
101
Advertisement
Table of Contents
