NetComm Wireless Router NB504 User Manual
  1. Manuals
  2. Brands
  3. NetComm Manuals
  4. Wireless Router
  5. NB504
  6. User manual

NetComm Wireless Router NB504 User Manual

54mbps wireless router
Hide thumbs Also See for Wireless Router NB504:
Table of Contents

Advertisement

Quick Links

See also: Setup Manual
YML864 Rev1
www.netcomm.com.a�
User Guide
NB504
����4 ��e�� ����e
����4 ��e�� ����e
54Mbps Wireless Router
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Wireless Router NB504 and is the answer not in the manual?

Questions and answers

Related Manuals for NetComm Wireless Router NB504

Summary of Contents for NetComm Wireless Router NB504

  • Page 1 YML864 Rev1 www.netcomm.com.a� User Guide NB504 ����4 ��e�� ����e ����4 ��e�� ����e 54Mbps Wireless Router...

  • Page 2: Table Of Contents

    5.4.3 MAC Clone ...33 5.5 Wireless ...34 5.5.1 Wireless Settings ...35 5.5.2 MAC Filtering ...38 5.5.3 Wireless Statistics ...41 5.6 DHCP ...42 5.6.1 DHCP Settings ...43 5.6.2 DHCP Clients List ...44 5.6.3 Address Reservation ...45 ����4 ��e�� ����e YML864Rev1 www.netcomm.com.a�...
  • Page 3 5.12.7 Log ...76 5.12.8 Statistics ...77 Appendix A: FAQ ...78 Appendix B: Configuring the PC ...83 Appendix C: specifications ...88 Appendix D: Glossary ...89 Appendix e: Legal and Regulatory Information ...90 YML864 Rev1 www.netcomm.com.a� ����4 ��e�� ����e ����4 ��e�� ����e...

  • Page 4: Package Contents

    One Resource CD for NB504 54Mbps Wireless Router, including: • This Guide • Other Helpful Information �ote: If any of the l��te� content� a��e �amage� o�� m����ng, plea�e contact the ��eta�le�� f��om whom yo� p���cha�e� the ����4 �4Mbp� W���ele�� Ro�te�� fo�� a����tance. ����4 ��e�� ����e YML864Rev1 www.netcomm.com.a�...

  • Page 5: Chapter 1: About This Guide

    Chapter 3: Connecting the Router Chapter 4: Quick Installation Guide Chapter 5: Configuring the Router Appendix A: FAQ Appendix B: Configuring the PC Appendix C: specifications Appendix D: Glossary Appendix e: Contact Information YML864 Rev1 www.netcomm.com.a� ����4 ��e�� ����e ����4 ��e�� ����e �...

  • Page 6: Chapter 2: Introduction

    The NB504 54Mbps Wireless Router is easy-to-manage. Quick Setup is supported and friendly help messages are provided for every step. So you can configure it quickly and share Internet access, files and fun. ����4 ��e�� ����e YML864Rev1 www.netcomm.com.a�...

  • Page 7: Features

    Provides 64/128/152-bit WEP encryption security and wireless LAN ACL (Access Control List). • Supports Flow Statistics. • Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter. • Ignores Ping packets from WAN or LAN ports. • Supports firmware upgrade. • Supports Web management. YML864 Rev1 www.netcomm.com.a� ����4 ��e�� ����e ����4 ��e�� ����e...

  • Page 8: Panel Layout

    The Wireless function is enabled There is no device linked to the corresponding port There is a device linked to the corresponding port but no activity There is an active device linked to the corresponding port Table 2-1 The LEDs description YML864Rev1 www.netcomm.com.a�...

  • Page 9: The Rear Panel

    System LED lights up (about 3 seconds). Last, release the reset button and wait for the router to reboot. �ote: En����e the ��o�te�� �� powe��e� on befo��e �t ��e�ta��t� completely. • Wireless antenna YML864 Rev1 www.netcomm.com.a� ����4 ��e�� ����e ����4 ��e�� ����e...

  • Page 10: Chapter 3: Connecting The Router

    Do not cluttered or crowded. There should be at least 2 inches (5 cm) of clear space on all sides of the router • Well ventilated (especially if it is in a closet) • Operating temperature: 0 • Operating Humidity: 10%~90%RH, Non-condensing ����4 ��e�� ����e 1� C~40 C (32 F~104 YML864Rev1 www.netcomm.com.a�...

  • Page 11: Connecting The Router

    Connect the AC power adapter to the AC power socket on the router, and the other end into an electrical outlet. The router will start to work automatically. Power on your PC and Cable/DSL modem. YML864 Rev1 www.netcomm.com.a� ����4 ��e�� ����e ����4 ��e�� ����e...

  • Page 12: Chapter 4: Quick Installation Guide

    IP address for the PC. Now, you can run the Ping command in the command prompt to verify the network connection between your PC and the router. The following example is in Windows 2000 OS. ����4 ��e�� ����e YML864Rev1 www.netcomm.com.a�...
  • Page 13 �ote: If the ��o�te��’� IP a����e�� �� 1.168.1.1, yo��� PC’� IP a����e�� m��t be w�th�n the ��ange of 1.168.1. ~ 1.168.1.�4, the gateway m��t be 1.168.1.1 YML864 Rev1 www.netcomm.com.a� Figure 4-1 Successful result of Ping command Figure 4-2 Failed result of Ping command ����4 ��e��...

  • Page 14: Quick Installation Guide

    �ote: If the above �c��een �oe� not pop-�p, �t mean� that yo��� web-b��ow�e�� ha� been �et to a p��oxy. �o to Tool� men�>Inte��net Opt�on�>Connect�on�>LA� Sett�ng�, �n the �c��een that appea���, cancel the ���ng P��oxy checkbox, an� cl�ck OK to fin��h �t. ����4 ��e�� ����e Figure 4-3 Login the router Figure 4-4 Login Windows YML864Rev1 www.netcomm.com.a�...
  • Page 15 If you choose “Dynamic IP”, the router will automatically receive the IP parameters from your ISP without needing to enter any parameters. YML864 Rev1 www.netcomm.com.a� Figure 4-5 Quick Setup Figure 4-6 Choose WAN Connection Type Figure 4-7 Quick Setup - PPPoE ����4 ��e��...
  • Page 16 Primary DNS - Enter the DNS Server IP address into the boxes if required. • Secondary DNS - If your ISP provides another DNS server, enter it into this field. �ote - Fo�� othe�� connect�on type� plea�e ��efe�� to �ect�on �.4. ����4 ��e�� ����e Figure 4-8 Quick Setup - Static IP YML864Rev1 www.netcomm.com.a�...
  • Page 17 SSID - Enter a value of up to 32 characters. The same SSID must be assigned to all wireless devices on your network. The default SSID is Wireless. This value is case-sensitive. For example, NETCOMM is NOT the same as Netcomm.
  • Page 18 Click the Next button, you will then see the Finish page: After finishing all configurations of basic network parameters, please click Finish button to exit this Quick Setup. ����4 ��e�� ����e Figure 4-10 Quick Setup - Finish YML864Rev1 www.netcomm.com.a�...

  • Page 19: Chapter 5: Configuring The Router

    To apply any settings you have altered on the page, please click the Save button. The detailed explanations for each web page key’s function is listed. YML864 Rev1 www.netcomm.com.a� ����4 ��e�� ����e ����4 ��e�� ����e...

  • Page 20: Status

    If you have not connected to the Internet, just click Connect to establish the connection. Traffic Statistics This field displays the router’s traffic statistics. System Up Time amount of time from when the router was switched on or reset. ����4 ��e�� ����e � YML864Rev1 www.netcomm.com.a�...
  • Page 21 YML864 Rev1 www.netcomm.com.a� Figure 5-1 Router Status ����4 ��e�� ����e ����4 ��e�� ����e...

  • Page 22: Quick Setup

    If the new LA� IP A����e�� yo� �et �� not �n the �ame ��bnet, the V���t�al Se��ve�� an� DMZ Ho�t w�ll change acco����ngly at the �ame t�me. ����4 ��e�� ����e Figure 5-2 the Network menu Figure 5-3 LAN YML864Rev1 www.netcomm.com.a�...

  • Page 23: Wan

    �ote: If yo� get an a����e�� an� fin� e����o�� when yo� go to a Web ��te, �t �� l�kely that yo��� D�S �e��ve��� a��e �et �p �mp��ope��ly. Yo� �ho�l� contact yo��� ISP to get D�S �e��ve�� a����e��e�. YML864 Rev1 www.netcomm.com.a� Figure 5-4 WAN – Dynamic IP ����4 ��e�� ����e...
  • Page 24 Primary DNS - (Optional) Enter the DNS address in dotted-decimal notation provided by your ISP. • Secondary DNS - (Optional) Type another DNS address in dotted-decimal notation provided by your ISP if provided. ����4 ��e�� ����e Figure 5-5 WAN - Static IP YML864Rev1 www.netcomm.com.a�...
  • Page 25 Ca�t�on: Somet�me� the connect�on cannot be ���connecte� altho�gh yo� �pec�fy a t�me to Max I�le T�me, ��nce �ome appl�cat�on� a��e v���t�ng the Inte��net cont�n�ally �n the backg��o�n�. YML864 Rev1 www.netcomm.com.a� Figure 5-6 WAN - PPPoE ����4 ��e�� ����e ����4 ��e�� ����e...
  • Page 26 “Use the following DNS servers” checkbox and enter the IP address in dotted-decimal notation of your ISP’s primary DNS server. If a secondary DNS server address is available, enter it as well. Click the Save button to save your settings. ����4 ��e�� ����e Figure 5-7 PPPoE Advanced Settings YML864Rev1 www.netcomm.com.a�...
  • Page 27 Login to start 802.1X authentication. Click Logout to end 802.1X authentication. • Host Name - This field is required to be filled by some service provider. YML864 Rev1 www.netcomm.com.a� Figure 5-8 802.1X + Dynamic IP Settings ����4 ��e�� ����e ����4 ��e�� ����e...
  • Page 28 Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your ISP. Default Gateway - (Optional) Enter the default gateway IP address in dotted-decimal notation • provided by your ISP. ����4 ��e�� ����e Figure 5-9 802.1X + Static IP Settings YML864Rev1 www.netcomm.com.a�...
  • Page 29 Ca�t�on: Somet�me� the connect�on cannot be ���connecte� altho�gh yo� �pec�fy a t�me to Max I�le T�me, ��nce �ome appl�cat�on� a��e v���t�ng the Inte��net cont�n�ally �n the backg��o�n�. • Click the Connect button to connect immediately, Click the Disconnect button to disconnect immediately. YML864 Rev1 www.netcomm.com.a� Figure 5-10 BigPond Settings ����4 ��e�� ����e ����4 ��e�� ����e...
  • Page 30 Internet connecting last unless a new link is requested. Ca�t�on: Somet�me� the connect�on cannot be ���connecte� altho�gh yo� �pec�fy a t�me to Max I�le T�me, ��nce �ome appl�cat�on� a��e v���t�ng the Inte��net cont�n�ally �n the backg��o�n�. ����4 ��e�� ����e � Figure 5-11 L2TP Settings YML864Rev1 www.netcomm.com.a�...
  • Page 31 Ca�t�on: Somet�me� the connect�on cannot be ���connecte� altho�gh yo� �pec�fy a t�me to Max I�le T�me, ��nce �ome appl�cat�on� a��e v���t�ng the Inte��net cont�n�ally �n the backg��o�n�. YML864 Rev1 www.netcomm.com.a� Figure 5-12 PPTP Settings ����4 ��e�� ����e ����4 ��e�� ����e...
  • Page 32 Internet connecting last unless a new link is requested. Ca�t�on: Somet�me� the connect�on cannot be ���connecte� altho�gh yo� �pec�fy a t�me to Max I�le T�me, ��nce �ome appl�cat�on� a��e v���t�ng the Inte��net cont�n�ally �n the backg��o�n�. ����4 ��e�� ����e YML864Rev1 www.netcomm.com.a�...

  • Page 33: Mac Clone

    Only the PC on yo��� LA� can ��e the MAC A����e�� Clone feat���e. If yo� cl�ck the Save b�tton, the ��o�te�� w�ll p��ompt yo� to ��eboot. YML864 Rev1 www.netcomm.com.a� Figure 5-13 MAC Address Clone ����4 ��e�� ����e ����4 ��e�� ����e...

  • Page 34: Wireless

    There are three submenus under the Wireless menu (shown in figure 5-14): Wireless Settings, MAC Filtering and Wireless Statistics. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. ����4 ��e�� ����e Figure 5-14 Wireless menu YML864Rev1 www.netcomm.com.a�...

  • Page 35: Wireless Settings

    SSID - Enter a value of up to 32 characters. The same name (SSID) must be assigned to all wireless devices in your network. The default SSID is Wireless, but it is recommended strongly that you change your networks name (SSID) to a different value. This value is case-sensitive. For example, NETCOMM is NOT the same as Netcomm.
  • Page 36 For 152-bit encryption - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not permitted) or 16 ASCII characters. • Encryption - When you select WPA-PSK/WPA2-PSK or WPA/WPA2 for Authentication Type you can select either Automatic, TKIP or AES as Encryptions. ����4 ��e�� ����e YML864Rev1 www.netcomm.com.a�...
  • Page 37 Radius Password - Enter the password for the Radius Server. Be sure to click the Save button to save your settings on this page. �ote: The ��o�te�� w�ll ��eboot a�tomat�cally afte�� yo� cl�ck �ave. YML864 Rev1 www.netcomm.com.a� Figure 5-15a WPA-PSK/WPA2-PSK Figure 5-15b WPA/WPA2 ����4 ��e�� ����e...

  • Page 38: Mac Filtering

    MAC Address Filtering entry” page will appear, shown in figure 5-17: Figure 5-17 Add or Modify Wireless MAC Address Filtering entry To add or modify a MAC Address Filtering entry, follow these instructions: ����4 ��e�� ����e Figure 5-16 Wireless MAC address Filtering YML864Rev1 www.netcomm.com.a�...
  • Page 39 2F34D20BE2E54B326C5476586A in the WEP Key field and select Enabled in the Status pull-down list. Click the Save and the Return button. The filtering rules that configured should be similar to the following list: YML864 Rev1 www.netcomm.com.a� ����4 ��e�� ����e ����4 ��e�� ����e...
  • Page 40 If yo� enable the f�nct�on an� �elect the Deny the �tat�on� not �pec�fie� by any enable� ent���e� �n the l��t to acce�� fo�� F�lte���ng R�le�, an� the��e a��e not any enable ent���e� �n the l��t, th��, no w���ele�� �tat�on� can acce�� the ��o�te�� . ����4 ��e�� ����e 4� YML864Rev1 www.netcomm.com.a�...

  • Page 41: Wireless Statistics

    If the numbers of connected wireless stations go beyond one page, click the Next button to go to the next page and click the Previous button to return the previous page. �ote: Th�� page w�ll be ��ef��e�he� a�tomat�cally eve��y � �econ��. YML864 Rev1 www.netcomm.com.a� Figure 5-18 The router attached wireless stations ����4 ��e�� ����e ����4 ��e�� ����e...

  • Page 42: Dhcp

    There are three submenus under the DHCP menu (shown in figure 5-19): DHCP Settings, DHCP Clients List and Address Reservation. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. ����4 ��e�� ����e Figure 5-19 The DHCP menu YML864Rev1 www.netcomm.com.a�...

  • Page 43: Dhcp Settings

    �ote: To ��e the DHCP �e��ve�� f�nct�on of the ��o�te�� , yo� m��t config���e all comp�te��� on the LA� a� “Obta�n an IP A����e�� a�tomat�cally” mo�e. Th�� f�nct�on w�ll take effect �nt�l the ��o�te�� ��eboot�. YML864 Rev1 www.netcomm.com.a� Figure 5-20 DHCP Settings ����4 ��e�� ����e...

  • Page 44: Dhcp Clients List

    You cannot change any of the values on this page. To update this page and to show the current attached devices, click on the Refresh button. ����4 ��e�� ����e Figure 5-21 DHCP Clients List YML864Rev1 www.netcomm.com.a�...

  • Page 45: Address Reservation

    MAC Address - The MAC address of the PC of which you want to reserve IP address. • Assigned IP Address - The IP address of the router reserved. • Status - The status of this entry either Enabled or Disabled. YML864 Rev1 www.netcomm.com.a� Figure 5-22 Address Reservation ����4 ��e�� ����e ����4 ��e�� ����e 4�...
  • Page 46 Click the Delete All button to delete all entries Click the Next button to go to the next page and Click the Previous button to return the previous page. �ote: The f�nct�on won’t take effect �nt�l the ��o�te�� ��eboot�. ����4 ��e�� ����e YML864Rev1 www.netcomm.com.a�...

  • Page 47: Forwarding

    Protocol - The protocol used for this application, either TCP, UDP, or All (all protocols supported by the router). • Status - The status of this entry either Enabled or Disabled. YML864 Rev1 www.netcomm.com.a� Figure 5-24 The Forwarding menu Figure 5-25 Virtual Servers ����4 ��e�� ����e ����4 ��e�� ����e...
  • Page 48 �ote: If yo� �et the v���t�al �e��ve�� of �e��v�ce po��t a� 8�, yo� m��t �et the web management po��t on Sec����ty –> Remote Management page to be any val�e except 8� ��ch a� 8�8�. O�� el�e the��e w�ll be a confl�ct to ���able the v���t�al �e��ve�� . ����4 ��e�� ����e Figure 5-26 Add or Modify a Virtual Server Entry YML864Rev1 www.netcomm.com.a�...

  • Page 49: Port Triggering

    Incoming Protocol - The protocol used for Incoming Ports Range, either TCP or UDP, or ALL (all protocols supported by the router). • Status - The status of this entry either Enabled or Disabled. YML864 Rev1 www.netcomm.com.a� Figure 5-27 Port Triggering ����4 ��e�� ����e ����4 ��e�� ����e...
  • Page 50 . Each ���le allowe� to be ��e� only by one ho�t on LA� �ynch��ono��ly. The t���gge�� connect�on of othe�� ho�t� on LA� w�ll be ��ef��e�. . Incom�ng Po��t Range cannot ove��lap each othe�� . ����4 ��e�� ����e �� Figure 5-28 Add or Modify a Triggering Entry YML864Rev1 www.netcomm.com.a�...

  • Page 51: Dmz

    Enter the local host IP Address in the DMZ Host IP Address field Click the Save button. �ote: Afte�� yo� �et the DMZ ho�t, the fi��ewall ��elate� to the ho�t w�ll not wo��k. YML864 Rev1 www.netcomm.com.a� Figure 5-29 DMZ ����4 ��e�� ����e ����4 ��e�� ����e...

  • Page 52: Upnp

    IP Address - The UPnP device that is currently accessing the router. • Status - Either Enabled or Disabled, “Enabled” means that port is still active, otherwise, the port is inactive. Click Refresh to update the Current UPnP Settings List. ����4 ��e�� ����e � Figure 5-30 UPnP Settings YML864Rev1 www.netcomm.com.a�...

  • Page 53: Security

    Domain Filtering, MAC Filtering, Remote Management and Advanced Security. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. YML864 Rev1 www.netcomm.com.a� Figure 5-31 The Security menu ����4 ��e�� ����e ����4 ��e�� ����e...

  • Page 54: Firewall

    Enable MAC Filtering - set MAC Address Filtering is enabled or disabled. You can select the default filtering rules of MAC Address Filtering, either Allow or Deny accessing the router. ����4 ��e�� ����e �4 Figure 5-32 Firewall Settings YML864Rev1 www.netcomm.com.a�...

  • Page 55: Ip Address Filtering

    WAN Ports have been put into the field. Protocol - Select which protocol is to be used, either TCP, UDP, or All (all protocols supported by the router). YML864 Rev1 www.netcomm.com.a� Figure 5-33 IP address Filtering ����4 ��e�� ����e ����4 ��e��...
  • Page 56 For example: If you desire to block E-mail received and sent by the IP Address 192.168.1.7 on your local network, and to make the PC with IP Address 192.168.1.8 unable to visit the website of IP Address 202.96.134.12, while other PCs have no limit you should specify the following IP address filtering list: ����4 ��e�� ����e �6 YML864Rev1 www.netcomm.com.a�...

  • Page 57: Domain Filtering

    Status - Select Enabled or Disabled for this entry on the Status pull-down list. Click the Save button to save this entry. YML864 Rev1 www.netcomm.com.a� Figure 5-35 Domain Filtering Figure 5-36 Add or Modify a Domain Filtering entry ����4 ��e�� ����e ����4 ��e��...
  • Page 58 For example, if you want to block the PCs on your LAN to access websites www.xxyy.com.cn, www.aabbcc. com and websites with .net in the end on the Internet while no limit for other websites, you should specify the following Domain filtering list: ����4 ��e�� ����e �8 YML864Rev1 www.netcomm.com.a�...

  • Page 59: Mac Filtering

    Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete. Modify the information. Click the Save button. Click the Enable All button to make all entries enabled. YML864 Rev1 www.netcomm.com.a� Figure 5-37 MAC address Filtering ����4 ��e�� ����e ����4 ��e�� ����e �...
  • Page 60 Internet, first, enable the Firewall and MAC Address Filtering on the Firewall page, then, you should specify the Default MAC Address Filtering Rule “Deny these PCs with effective rules to access the Internet” on the Firewall page and the following MAC address filtering list on this page: ����4 ��e�� ����e 6� YML864Rev1 www.netcomm.com.a�...

  • Page 61: Remote Management

    You will be asked for the router’s password. After successfully entering the password, you will be able to access the router’s web-based utility. �ote: �e ����e to change the ��o�te��’� �efa�lt pa��wo��� to a ve��y �ec���e pa��wo���. YML864 Rev1 www.netcomm.com.a� Figure 5-39 Remote Management ����4 ��e�� ����e ����4 ��e�� ����e...

  • Page 62: Advanced Security

    If enabled, the ping packet from the Internet cannot access the router. �ote: Plea�e enable C�����ent Stat��t�c� Stat�� �n Sy�tem Tool� > Stat��t�c� page to ��e the DOS P��otect�on, ��efe�� to Chapte�� �.11.8 ����4 ��e�� ����e Figure 5-40 Advanced Security settings YML864Rev1 www.netcomm.com.a�...
  • Page 63 Click the Clear All button to clear all displayed entries. After the table is empty the blocked host will regain the capability to access Internet. Click the Return button to return to the Advanced Security page YML864 Rev1 www.netcomm.com.a� Figure 5-41 Thwarted DoS Host Table ����4 ��e�� ����e ����4 ��e�� ����e...

  • Page 64: Ip & Mac Binding Settings

    This page is used for adding or modifying an IP & MAC Binding entry (shown in Figure 5-44). Figure 5-44 IP & MAC Binding Setting (Add & Modify) ����4 ��e�� ����e Figure 5 4- the IP & MAC Binding menu Figure 5-43 IP & MAC Binding Setting YML864Rev1 www.netcomm.com.a�...
  • Page 65 Enter the Find button in the next page (shown in Figure 5-45). Click the Enable All button to make all entries enabled. Click the Delete All button to delete all entries. YML864 Rev1 www.netcomm.com.a� Figure 5-45 Find IP & MAC Binding Entry ����4 ��e�� ����e ����4 ��e�� ����e...

  • Page 66: Arp List

    �ote: An �tem co�l� not be loa�e� to the IP & MAC ��n��ng l��t �f the IP a����e�� of the �tem ha� been loa�e� befo��e. E����o�� wa��n�ng w�ll p��ompt a� well. L�kew��e, “Loa� All” only loa�� the �tem� w�tho�t �nte��fe��ence to the IP & MAC ��n��ng l��t. ����4 ��e�� ����e Figure 5-46ARP List YML864Rev1 www.netcomm.com.a�...

  • Page 67: Static Routing

    Click the Enable All button to make all entries enabled. Click the Disabled All button to make all entries disabled. Click the Delete All button to delete all entries YML864 Rev1 www.netcomm.com.a� Figure 5-47 Static Routing Figure 5-48 Add or Modify a Static Route Entry ����4 ��e�� ����e...

  • Page 68: Dynamic Ddns

    Click the Login button to login to the DDNS service. • Connection Status -The status of the DDNS service connection is displayed here. Click Logout to logout of the DDNS service. ����4 ��e�� ����e Figure 5-49 Dyndns.org DDNS Settings YML864Rev1 www.netcomm.com.a�...

  • Page 69: Oray.net Ddns

    Connection Status - The status of the DDNS service connection is displayed here. • Domain Name - The domain names are displayed here. Click Logout to logout the DDNS service. YML864 Rev1 www.netcomm.com.a� Figure 5-50 Oray.net DDNS Settings ����4 ��e�� ����e ����4 ��e�� ����e...

  • Page 70: Comexe.cn Ddns

    Click the Login button to login to the DDNS service. • Connection Status -The status of the DDNS service connection is displayed here. Click Logout to logout of the DDNS service. ����4 ��e�� ����e � Figure 5-51 Comexe.cn DDNS Settings YML864Rev1 www.netcomm.com.a�...

  • Page 71: System Tools

    Defaults, Backup and Restore, Reboot, Password, Log and Statistics. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided. YML864 Rev1 www.netcomm.com.a� Figure 5-52 The System Tools menu ����4 ��e�� ����e...

  • Page 72: Time

    ��cce��f�lly, �f not, the t�me l�m�te� on the�e f�nct�on� w�ll not take effect. The t�me w�ll be lo�t �f the ��o�te�� �� t���ne� off. The ��o�te�� w�ll obta�n �MT a�tomat�cally f��om Inte��net �f �t ha� al��ea�y connecte� to Inte��net. ����4 ��e�� ����e Figure 5-53 Time settings YML864Rev1 www.netcomm.com.a�...

  • Page 73: Firmware

    The page (shown in figure 5-54) allows you to upgrade the latest version firmware to keep your router up-to- date. New firmware is posted at www.netcomm.com.au and can be downloaded for free. If the router is not experiencing difficulties, there is no need to upgrade firmware, unless the new firmware supports a new feature you need.

  • Page 74: Factory Defaults

    �ote: The c�����ent config���at�on w�ll be cove��e� w�th the �ploa��ng config���at�on file. The ��e�to��at�on p��oce�� la�t� fo�� � �econ�� an� the ��o�te�� w�ll ��e�ta��t a�tomat�cally. Keep the ��o�te�� on �����ng the ��e�to���ng p��oce��, to p��event any �amage. ����4 ��e�� ����e Figure 5-55 Restore Factory Default Figure 5-56 Backup & Restore Configuration YML864Rev1 www.netcomm.com.a�...

  • Page 75: Reboot

    �ote: The new ��e�� name an� pa��wo��� m��t not excee� 14 cha��acte��� �n length an� m��t not �ncl��e any �pace�. Ente�� the new Pa��wo��� tw�ce to confi��m �t. Click the Save button when finished. Click the Clear All button to clear all. YML864 Rev1 www.netcomm.com.a� Figure 5-57 Reboot the router Figure 5-58 Password ����4 ��e�� ����e ����4 ��e�� ����e...

  • Page 76: Log

    The router can keep logs of all traffic. You can query the logs to find what happened to the router. Click the Refresh button to refresh the logs. Click the Clear Log button to clear all the logs. ����4 ��e�� ����e Figure 5-59 System Log YML864Rev1 www.netcomm.com.a�...

  • Page 77: Statistics

    Click the Auto-refresh checkbox to refresh automatically. Click the Refresh button to refresh immediately. YML864 Rev1 www.netcomm.com.a� Figure 5-60 Statistics The total amount of packets received and transmitted by the router. The total amount of bytes received and transmitted by the router.

  • Page 78: Appendix A: Faq

    Somet�me� the connect�on cannot be ���connecte� altho�gh yo� �pec�fy a t�me to Max I�le T�me, ��nce �ome appl�cat�on� �� v���t�ng the Inte��net cont�n�ally �n the backg��o�n�. ��. If yo� a��e a Cable ��e�� , plea�e config���e the ��o�te�� follow�ng the above �tep�. ����4 ��e�� ����e Figure A-1 PPPoE Connection Type Figure A-2 PPPoE Connection Mode YML864Rev1 www.netcomm.com.a�...
  • Page 79 MAC Address into the “WAN MAC Address” field. The format for the MAC Address is XX-XX-XX- XX-XX-XX. Then click the “Save” button. It will take effect after rebooting. YML864 Rev1 www.netcomm.com.a� Figure A-3 MAC Clone ����4 ��e�� ����e ����4 ��e�� ����e...
  • Page 80 80, such as 88, into the “Web Management Port” field. Click “Save” and reboot the router. ����4 ��e�� ����e 8� Figure A-4 Virtual Servers Figure A-5 Add or Modify a Virtual server Entry Figure A-6 DMZ YML864Rev1 www.netcomm.com.a�...
  • Page 81 Server” page, enter “80” into the blank behind the “Service Port”, and your IP address behind the IP Address, assuming 192.168.1.188 for an example, remember to “Enable” and “Save”. YML864 Rev1 www.netcomm.com.a� Figure A-7 Remote Management Figure A-8 Virtual Servers Figure A-9 Add or Modify a Virtual server Entry ����4 ��e��...
  • Page 82 Make sure the wireless stations have right KEY for encryption when the router is encrypted. If the wireless connection is ready, but you can’t access the router, check the IP Address of your wireless stations. ����4 ��e�� ����e YML864Rev1 www.netcomm.com.a�...

  • Page 83: Appendix B: Configuring The Pc

    Click on the Add button. Select Protocol, and then click Add. Under Manufacturers on Select Network Protocol page, highlight Microsoft. Under Network Protocols, highlight TCP/IP. Click OK. TCP/IP protocol will take effect after reboot. YML864 Rev1 www.netcomm.com.a� Figure B-1 Add Network Protocol Figure B-2 Select Network Protocol ����4 ��e�� ����e...
  • Page 84 Assigned by DHCP Sever Select Obtain an IP address automatically, as shown in the figure below: Do not type anything into the New gateway field on the Gateway tab. ����4 ��e�� ����e Figure B-3 Configuration tab Figure B-4 IP Address tab YML864Rev1 www.netcomm.com.a�...
  • Page 85 Specify an IP address on IP Address tab, as shown in the following figure. If the router’s LAN IP address is 192.168.1.1, type IP address is 192.168.1.x (x is from 2 to 254), and subnet mask is 255.255.255.0. YML864 Rev1 www.netcomm.com.a� Figure B-5 Gateway tab Figure B-6 DNS Configuration tab ����4 ��e�� ����e ����4 ��e��...
  • Page 86 Host field and a Domain (such as szonline.com) into the Domain field. In the DNS Server Search Order field you can type the DNS server IP address, which has been provided by your ISP, and click Add button. Shown below: ����4 ��e�� ����e Figure B-7 IP Address tab Figure B-8 Gateway tab YML864Rev1 www.netcomm.com.a�...
  • Page 87 • The configuration is now finished and will take effect after rebooting. YML864 Rev1 www.netcomm.com.a� Figure B-9 DNS Configuration tab ����4 ��e�� ����e ����4 ��e�� ����e...

  • Page 88: Appendix C: Specifications

    Power supply 9V~ 0.8A LeDs Power, System, WLAN, WAN, 1-4 safety & emissions FCC, CE environmental and Physical operating temp. 0oC~40oC (32oF~104oF) operating humidity 10% - 95% RH, Non-condensing Dimensions (WxDxh) 186x146x44 mm (without antenna) ����4 ��e�� ����e YML864Rev1 www.netcomm.com.a�...

  • Page 89: Appendix D: Glossary

    802.11b devices. • WLAN (Wireless Local Area Network) - A group of computers and associated devices communicate with each other wirelessly, which network serving users are limited in a local area. YML864 Rev1 www.netcomm.com.a� ����4 ��e�� ����e ����4 ��e�� ����e...

  • Page 90: Appendix E: Legal And Regulatory Information

    The power supply that is provided with this unit is only intended for use with this product. Do not use this power supply with any other product or do not use any other power supply that is not approved for use with this product by NetComm. Failure to do so may cause damage to this product, fire or result in personal injury.

  • Page 91: Limitations Of Warranty

    The cost of transporting product to and from NetComm’s nominated premises is your responsibility; and, NetComm does not have any liability or responsibility under this warranty where any cost, loss, injury or damage of any kind, whether direct, indirect, consequential, incidental or otherwise arises out of events beyond NetComm’s reasonable control. This includes but is not limited to: acts of God, war, riot, embargoes, acts of civil or military authorities, fire, floods, electricity outages, lightning, power surges, or shortages of materials or labour.

  • Page 92: Contact Information

    Note: NetComm Technical Support for this product only covers the basic installation and features outlined in the Quick Start Guide. For further information regarding the advanced features of this product, please refer to the configuring sections in the User Guide or contact a Network Specialist.

Table of Contents

Save PDF