E-Mail - NetComm HS1200N User Manual

E-Mail

SMTP Settings:
Receiver Email Address (es): Up to 5 e-mail addresses can be set up to receive the notification. There are eight kinds of notification
for selection -- Monitor IP Report, Users Log, On-demand Users Log, Roaming Out Users Log, Roaming In Users Log, Session
Log, Firewall Log, and On-demand Billing Report, check the selection box to choose the type of notification to be sent.
Sender Email Address: The e-mail address of the administrator in charge of monitoring. This will show up as the sender's e-mail.
SMTP Server: The IP address of the sender's SMTP server.
SMTP over SSL: Enable or Disable SMTP over SSL for additional security
SMTP Authentication: The system provides four authentication methods, Plain, Login, CRAM-MD5 and NTLMv1, or "None" to use
none of the above. Depending on which authentication method is selected, enter the Account Name, Password and Domain.
NTLMv1 is not currently available for general use.
Plain and CRAM-MD5 are standardized authentication mechanisms while Login and NTLMv1 are Microsoft proprietary
mechanisms. Only Plain and Login can use the UNIX login password. Netscape uses Plain. Outlook and Outlook express use Login
as default, although they can be set to use NTLMv1.
Pegasus uses CRAM-MD5 or Login however the method to be used can not be configured.
Notification E-mail Settings:
Receiver Email Address (es): Up to 5 e-mail addresses can be set up to receive the notification. There are eight kinds of notification
for selection -- Monitor IP Report, Users Log, On-demand Users Log and Session Log, check the selection box to choose the type
of notification to be sent.
Interval: The time interval to send the e-mail report.
www.netcommwireless.com NetComm Wireless HS1200N Wireless N Hotspot
103