Table of Contents
Advertisement
Review your settings then click ‚Finish‛ to save configuration. Click ‚Back‛ if you want to make changes.
After clicking Finish, the 3G36W-V will save your configuration and reboot itself. Please wait as this process takes about 2 minutes.
You will be guided back to the management console once the process is complete.
Management Console Login Procedure
After first time setup, the management console will be password protected to prevent unauthorized access to the configuration
settings of your 3G36W-V.
To log in to the management console and view the status and make changes to your 3G36W-V, please follow the steps below:
1.
Open your web browser (e.g. Internet Explorer/Firefox/Safari) and navigate to http://192.168.20.1 or http://my.router
2.
Enter the username and password configured during the first time setup and click submit. The default username admin with
a blank password if the details haven't been customized. Click Login to continue.
Please Note: If you forget the username and password you selected during the 3G36W-V set-up process, holding the
reset button for over 10 seconds will restart the unit with the original settings (username: admin / no password).
3G36W-V User Guide
13
Figure 7 - Startup Wizard - Review your settings
Figure 8 - Management Console Login
YML36W-VX
www.netcomm.com.au
Advertisement
Table of Contents
