Table of Contents
Advertisement
WDS (Wireless Distribution System)
The Wireless Distribution system allows the router's network to be expanded, using connecting access points that are capable of
using WDS mode. There are two methods of WDS that can be employed; WDS Bridge mode or WDS Repeater mode. In both
WDS Bridge and Repeater modes the router and all associated access points must use the same Encryption type and encryption
key as well as wireless channel (frequency).
In WDS Bridge mode the wireless signal of the router and each access point is used as a bridge with 100% of the wireless signal
used to link the router and access points. This means network access can only be made through Ethernet cable connections.
Wireless clients will not be able to connect to either the router or access points.
www.netcommwireless.com
Figure 32 - Advanced View - WDS Settings
Figure 33 - Advanced View - Wireless - WDS Bridge Mode
NetComm Wireless 3G27WV-02 User Guide
38
Advertisement
Table of Contents
