Network Settings - SMART Board X800ix User Manual

A P P E N D I X A
Remotely managing your interactive whiteboard system

Network settings

This menu allows you to enable or disable Dynamic Host Control Protocol (DHCP) and set the
network related addresses and names.
Submenu setting
DHCP
IP Address
Subnet Mask
Gateway
DNS
Group Name
Projector Name
Location
Contact
SNMP Enable
Read-Only Community
Read/Write Community
Trap Destination Address
60
Description
Turns the network's DHCP on or off.
On automatically assigns the DHCP server's IP address to the
l
projector.
Off enables you to assign an IP address manually.
l
Displays the projector's IP address in values between 0.0.0.0 and
255.255.255.255.
Displays the projector's subnet work mask number in values between
0.0.0.0 and 255.255.255.255.
Displays the projector's default network gateway in values between
0.0.0.0 and 255.255.255.255.
Displays the projector's primary domain name number in values
between 0.0.0.0 and 255.255.255.255.
Displays the projector's workgroup name (maximum 12 characters).
Displays the projector's name (maximum 12 characters).
Displays the projector's location (maximum 16 characters).
Displays the contact name or number for projector support (maximum
16 characters).
Turns the SNMP's MIB function on or off.
This option has a password sent with each SNMP get request that
enables access to the device.
N
N O T E
The default for Read-Only Community is public.
This option has a password sent with each SNMP set request and
enables access to the device.
N
N O T E
The default for Read/Write Community is private.
Displays the projector's trap destination address in values between
0.0.0.0 and 255.255.255.255. The trap destination address is the IP
address of the computer assigned to handle unsolicited data
generated by projector trap events, such as power down, power up or
other issues.