SMART Board X800ix User Manual page 68

A P P E N D I X A
Remotely managing your interactive whiteboard system
Submenu setting
Degamma
Color
Auto Signal Detect
Lamp Reminder
Lamp Mode
Auto Power Off
Zoom
H-position (RGB input)
V-position (RGB input)
Aspect Ratio
Startup Screen
58
Description
Adjusts the color performance of the display from 0 to 3.
Adjusts the Red, Green, Blue, Cyan, Magenta and Yellow colors on
the projector from 0 to 100 to provide custom color and luminance
output. Each color has a default value of 100. Adjustments to the
color settings register to the User mode.
Enables or disables signal searching of input connectors.
Select On to have the projector continuously switch inputs until
l
it finds an active video source.
Select Off to maintain signal detection in one input.
l
Select On to show or Off to hide the lamp replacement reminder when
it appears. This reminder appears 100 hours before the recommended
lamp replacement.
Adjusts lamp brightness to Standard or Economy. Standard
displays a high-quality, bright image. Economy increases the lamp
life by decreasing the brightness of the image.
Sets the length of the auto power off countdown timer between 1 and
240 minutes. The timer begins to count down when the projector no
longer receives a video signal. The timer finishes when the projector
enters Standby mode. Select 0 to turn off the timer.
Adjusts the zoom to the center of the image in or out from
0 to 30.
Moves the projected image's horizontal position left or right from 0 to
100.
Moves the projected image's vertical position up or down from -5 to 5.
Adjusts the image output to Fill Screen, Match Input or 16:9.
Fill Screen produces an image that fills the entire screen by
l
stretching and scaling.
Match Input matches the projector's aspect ratio to the input's
l
aspect ratio. As a result, black bands might appear along the
top and bottom edge of the screen horizontally (letterbox
format) or along the left and right edge of the screen vertically,
(pillarbox format).
16:9 changes the output to 16:10 by letterboxing the image,
l
which is recommended for use with HDTV and DVDs
enhanced for wide- s creen television.
N
N O T E
See Video format compatibility on page 27 for appearance
descriptions in each mode.
Sets the type of startup screen to SMART or User. The SMART
screen is the default SMART logo on a blue background. The User
screen uses the saved picture from the Capture User Startup Screen
function.