Failurelog; Usb Control Settings; Network Settings - SMART Board SB800ix2 Configuration And User's Manual

APPENDIX A
REMOTELY MANAGING YOUR SYSTEM THROUGH A NETWORK INTERFACE

Failurelog

This menu enables you to view projector service details such as lamp hours, display hours,
temperature and lamp voltage on failure types such as lamp error and system overtemp.

USB Control settings

This menu allows you to associate a video source with a USB receptacle on the ECP or pen tray.
Submenu setting
USB1 Source
USB2 Source

Network settings

This menu allows you to use or not use Dynamic Host Control Protocol (DHCP) and to set the
network-related addresses and names when DHCP isn't used.
Submenu setting
DHCP
46 smarttech.com/kb/170340
Description
Enables touch for the selected video source (VGA, HDMI1, HDMI2
or Disabled) by associating the video source with the room computer
USB receptacle (USB1) on the ECP or pen tray.
Enables touch for the selected video source (VGA, HDMI1, HDMI2
or Disabled) by associating the video source with the laptop USB
receptacle (USB2) on the ECP or pen tray.
Description
Determines if the projector's IP address and other network settings
are dynamically assigned by a DHCP server or are manually set.
On allows the network's DHCP server to assign a dynamic IP
l
address to the projector.
Off allows you to manually set the projector's IP address and
l
other network settings.