SMART Board X800ix User Manual page 25

C H A P T E R 3
Using your interactive whiteboard system
Setting Use
Tint Adjusts the image color balance of red
and green from 0 to 100.
White Peaking Adjusts the image color brightness
from 0 to 10 while providing more
vibrant white shades.
Degamma Adjusts the color performance of the
display from 0 to 3.
Color Adjusts the Red, Green, Blue, Cyan,
Magenta and Yellow colors on the
projector from 0 to 100 to provide
custom color and luminance output.
Audio menu
Volume Increases and decreases the
projector's volume from -20 to 20.
Mute Mutes the projector's audio output.
Disable Volume Disables the projector's volume control
Control and the ECP's volume control knob.
Closed Captioning Turns closed captioning on or off.
Closed Captioning Sets the closed captioning language to
Language CC1 or CC2.
Default menu
Auto Signal Detect Enables or disables signal searching of
input connectors.
Lamp Reminder Turns the lamp replacement reminder
on or off.
Lamp Mode Adjusts lamp brightness to Standard
or Economy.
15
Notes
This setting applies to S-video and
composite video inputs only.
A value closer to 0 creates a natural
image and a value closer to 10
enhances brightness.
Each color has a default value of 100.
Adjustments to the color settings
register to the User mode.
If you mute the projector's audio output
and then increase or decrease the
volume, the volume is restored
automatically. You can prevent this
from happening by disabling the
volume control.
Typically, CC1 displays American
English subtitles, while CC2 displays
other regional languages, such as
French or Spanish, depending on
television channel or media setup.
Select On to have the projector
continuously switch inputs until it finds
an active video source.
Select Off to maintain signal detection
in one input.
This reminder appears 100 hours
before the recommended lamp
replacement.
Standard displays a high-quality,
bright image.
Economy increases the lamp life by
decreasing the brightness of the image.