SMART Board X800ix User Manual page 45

C H A P T E R 5
Maintaining your interactive whiteboard system
4. Pull the lamp cover forward and remove it from the projector. Put the lamp cover in a safe
place.
T
T I P
If the cover is difficult to remove, insert a flat screwdriver or small coin into the slot on the
bottom of the lamp cover to gently pry the cover open.
5. Use a Phillips screwdriver to loosen the two captive screws from the bottom of the lamp
module.
N
N O T E
Don't try to remove these screws. Captive screws can't be removed, but they must be loose.
35