C H A P T E R 3
Using your interactive whiteboard system
Using the remote control buttons
The projector remote control enables you to access on-screen menus and change projector settings.
Use the remote control's Power
system on or off. You can also use the remote control's Input button (or the ECP's Input button) to
switch sources on the projector.
Number
Function
1
Input
2
Menu
3
(Left), (Right),
(Up) and (Down) arrows
4
Hide
5
Mode
6
Mute
7
(Power)
8
(Enter)
9
(Volume Up)
10
(Volume Down)
Adjusting projector settings
The remote control's Menu button enables you to access the on-screen display to adjust the projector
settings.
13
button (or the ECP's Power
Description
Select an input source
Show the projector menus
Change the menu selections and adjustments
Freeze, hide or display the image
Press once to freeze the image.
l
For example, you can display a question on
the screen while you check your e-mail.
Press again to hide the image, that is, to
l
display a black screen.
Press again to return to the live image.
l
Select a display mode
Control mute settings from your audio output
device (not included)
Turn on or turn off the projector
Accept the selected mode or option
Increase the volume
Decrease the volume
button) to turn the projector