Table of Contents
Advertisement
Power Connections
Connect the Power cord (included) to the DVD recorder.
MAIN POWER switch
AC
OPERATE button
Turning the Power On
While in Operate Off mode (i.e., the OPERATE indicator
is lit up in orange), press the OPERATE button.
The power will turn on, the color of the OPERATE indicator
will change to green, and the DVD recorder will become
ready for use. (Operate On mode)
Note
A period of 45 seconds may pass before the DVD recorder
adopts Operate On mode as it prepares for operation.
A small amount of current will be required by the DVD
recorder when in Operate Off mode.
MAIN
Power cord
AC IN
(included)
OPERATE indicator
OPERATE
AUDIO
CH1
CH2
PHONES
REV
1.
Connect the Power cord (included) to the DVD
POWER
recorder's AC IN terminal.
2.
Connect the power cord (included) into an
electrical outlet.
3.
Set the MAIN POWER switch to ON.
Power will be supplied to the DVD recorder and the
OPERATE indicator will be lit up in green. (Operate On
mode)
The AC IN MODE item on the SYSTEM MENU (2/2)
screen can be used to specify whether to start up in the
Operate ON or OFF mode when the power switch is turned
ON. ( Page 64)
CAUTION
Always use the AC cord provided with the DVD recorder.
The use of other power cord should be avoided.
Do not turn the power off during recording or playback.
In the case of DVD-R discs, failure to observe this
precaution will result in the discs becoming unusable.
In the case of DVD-RW discs, it will be necessary to erase
all data from the disc and to start recording again from
the beginning.
Turning the Power Off
Stop the DVD recorder.
(It is recommended that you eject the disc at this time.)
1.
Press the OPERATE button.
The DVD recorder will adopt Operate Off mode and the
color of the OPERATE indicator will change to orange.
2.
If the DVD recorder will not be used for an extended
period of time, set the MAIN POWER switch to OFF.
When disconnecting the power cord, remove the power
cord from the electrical outlet first.
Notes
Pressing the OPERATE button will have no effect in
Recording mode or Recording Pause mode.
Pressing this button also has no effect during finalizing
and erasing.
21
Advertisement
Table of Contents
