Download  Print this page

Installing Your New Vcr; Connections - JVC HD-DH5US Instructions Manual

D-vhs digital recorder.
Hide thumbs

Advertisement

12
EN

Connections

To [i.LINK
IN/OUT]
Back of VCR
i.LINK IN/OUT
HDMI OUT
OPTICAL
DV IN
S400
D-THEATER
PCM/STREAM
REGION 1
DIGITAL AUDIO OUT
AC Outlet
NOTES:
HDMI will be automatically activated (HDMI-ON) when a HDMI connection has been made. To de-activate (HDMI-OFF), press
[HDMI] on the front panel and the [HDMI] LED will turn off.
During HDMI-ON ([HDMI] LED on), the image format output to the TV connected via the HDMI connector will be in accordance to
the image format of the TV. During HDMI-OFF ([HDMI] LED off), the image format output to the TV is in accordance to this VCR's
"IN/OUT FUNCTION" menu settings "TV OUTPUT 1" and "TV OUTPUT 2" (
displayed on the TV when using the HDMI to DVI connection, try setting HDMI to OFF.
If your TV is not High-Bandwidth Digital Content Protection (HDCP) compatible, the pictures will not be properly displayed on the
TV. In this case, use the component video, s-video or video connection.
If you cannot see the pictures on the TV screen when you play back a tape, set "TV OUTPUT 2" to the appropriate mode (
65). "TV OUTPUT 2" is invalid when HDMI is activated.
To operate the VCR with your TV using the HDMI, DVI, Component Video or S-VIDEO connection, set your TV to the AV mode
using the TV's Remote.
You can also use the TV/VCR button on the VCR's Remote to set your TV to the AV mode (
To ensure that you can record one show while watching another (
RF cable.
Use the commercially available i.LINK cable (4-pin, S400, below 3m). If the cable used is above 3m, this VCR will not fully
maximize its performance.
For full identification of the VCR's rear panel, refer to the Index (
i.LINK Cable (not supplied)
Matching Transformer
(not supplied)
S-VIDEO
S-VIDEO
VHF/UHF
VIDEO
VIDEO
ANTENNA
Y
P
/C
L
L
B
B
AUDIO
AUDIO
CABLE BOX
P
/C
R
R
R
R
ANTENNA
L-1
L-2
COMPONENT
OUTPUT
INPUT
REMOTE PAUSE/
VIDEO OUT
AV COMPULINK
To [S-VIDEO OUTPUT]
S-VIDEO
To [VIDEO OUTPUT]
VIDEO
To [AUDIO OUTPUT]
L
AUDIO
R
OUTPUT
Component Video Cable (not supplied)
To [COMPONENT
VIDEO OUTPUT]
To [HDMI OUT]
When your TV has only DVI input, you can use a commercially
available HDMI to DVI conversion cable to connect between the
VCR and your TV.
To [HDMI OUT]
Flat Feeder
Coaxial Cable
To [ANTENNA IN]
(Antenna or cable
Antenna or Cable
input)
for digital broadcast
To [ANTENNA
OUT]
IN
RF Cable (supplied)
OUT
S-Video Cable
(supplied)
Video Cable
OR
(not supplied)
Audio Cable
(supplied)
To Audio Input Connectors
To Component Video Connectors
HDMI Cable (not supplied)
HDMI to DVI conversion cable
(commercially available, not
supplied)
A
A
page 38), you must also connect the VCR to the TV using the
A
page 8).

INSTALLING YOUR NEW VCR

To i.LINK Input/Output Connector
Antenna or Cable
To 75K terminal
To S-Video Input
Connector
To Video
Input Connector
To DVI
connector
page 65). If the picture cannot be properly
A
page 76).
Integrated HDTV
To HDMI
Connector
DIGITAL IN
R
AUDIO
L
VIDEO
A
page

Advertisement

Table of Contents

   Related Manuals for JVC HD-DH5US

This manual is also suitable for:

Hm-dh5usDh5u - hm digital vcrD-vhsHm-dh5u

Comments to this Manuals

Symbols: 0
Latest comments: