Input Select Menu Screen; System Menu Screen - JVC BD-X201M Instructions Manual

Setup Menu

INPUT SELECT MENU Screen

The following table identifies and describes the parameters that may be set using the INPUT SELECT MENU screen.
Top half : Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ] : Default setting
Parameter Possible settings
INPUT SELECT
INPUT
MENU
MENU

SYSTEM MENU Screen

The following table identifies and describes the parameters that may be set using the SYSTEM MENU screen.
Top half : Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ] : Default setting
SYSTEM MENU (1/2) screen
Parameter Possible settings
SETUP
SETUP
TEST SIGNAL
TEST S
FACTORY
SETTING
FACTRY
KEYBOARD
STYLE
KboARd
62
This parameter is used to select the audio and video input signals.
[LINE]
Y/C LINE : The composite video signal from the VIDEO LINE IN terminal and the analog
DV
Y/C : The YC separate signal from the Y/C IN terminal and the analog audio signals
DV : The digital video and audio signals from the DV IN/OUT terminal are to be used.
[LINE]
YC * The front-panel indicator corresponding to the type of input signal selected on this
dV screen will light up or start to flash.
Setting of this parameter will not be possible when REMOTE SELECT from the
REMOTE MENU screen has been set to DV(SLAVE), or DV(TRIGGER). DV signals
will be used for input at these times
This button is used to return to the Setup Menu screen.
This parameter is used to indicate whether or not a setup signal is to be added to analog
OFF
video (i.e., composite or YC separate) during the recording process. The actual setting depends
[ON]
on whether the input analog signal contains a setup signal. (NTSC ouly)
OFF : This setting should be made when the input analog signal does not contain
oFF
ON : This setting should be made when the input analog signal contains a setup signal.
[oN]
This parameter is used to indicate whether or not the color bar output by the DVD
[OFF]
recorder's internal signal generator is to be displayed.
ON
OFF : The color bar is not displayed and video from the VIDEO LINE IN terminal is
[oFF]
ON : The color bar is displayed. Use this setting when the color bar is to be recorded.
oN
This parameter is used to indicate whether or not all setup menu parameters are to
[CANCEL]
be returned to their default settings.
EXECUTE
CANCEL
EXECUTE : Default settings are to be restored. However, the current set values for
[CAN]
EXE
Note
The system must be restarted after this parameter is changed.
[ENGLISH] This parameter is set when using a USB keyboard, and its purpose is to indicate the
FRENCH
keyboard's layout (or language) as one of the following.
ITALIAN
ENGLISH
GERMAN
FRENCH
SPANISH ITALIAN
JAPANESE GERMAN
SPANISH
[ENG]
JAPANESE
FRN
Note
ITL The system must be restarted after this parameter is changed.
GER
ESP
JPN
audio signals from the AUDIO IN terminals are to be used.
from the AUDIO IN terminals are to be used.
a setup signal.
output to the monitor.
: Default settings are not to be restored.
the TV TYPE item on the SYSTEM MENU (2/2) screen will not be erased.
Description
Description