Table of Contents
Advertisement
Recording with the Front Panel (continued)
Note
When recording is stopped or a title is
closed, the state of progress will be
indicated on-screen using a progress bar.
Recording stopped
REC STOP
Progress bar
Inserting Chapter Marks Manually or Automatically
RECORDER MENU (1/2) screen
RECORDER MENU (1/2)
MENU
CHAPTER CREATION
SET INTERVAL
AUTO CHAPTER (RECPAUSE)
ENCODE QUALITY
AUDIO ENCODE
Using the Foot Switch to Perform Recording
Operations such as recording and writing chapter marks (indexes) can be performed using the external switch that is connected to
the foot switch terminal at the rear of this unit.
● Use the FOOT SW1 terminal to turn ON/OFF recording. The FOOT SW1 item on the REMOTE menu screen can be used to
specify whether to use the FOOT SW1 terminal as well as to specify conditions for using the terminal. ( Page 69)
● Use the FOOT SW2 terminal to write chapter marks (indexes). The FOOT SW2 item on the REMOTE menu screen can be used
to specify whether to use the FOOT SW2 terminal as well as to specify conditions for using the terminal. ( Page 69)
● It is necessary to set this unit to the Recording mode or Recording pause mode in advance when using the FOOT SW1 terminal.
6.
End recording and remove the disc.
Depending on how the disc will be used, one of two different procedures is
implemented at this time.
● If more content will be recorded to the disc using this DVD recorder:
Title closing
TITLE CLOSE
● If the disc is to be played on a different DVD player:
It is possible to insert a chapter mark either manually or automatically.
Indxes are written together with chapter marks.
The actual method to be used is determined by CHAPTER CREATION and
SET INTERVAL from the RECORDER MENU (1/2) screen.
● If chapter marks are to be inserted manually at any point, set CHAPTER
MANUAL
Every05Min
ON
SP
DOLBY DIGITAL
● If chapter marks are to be inserted automatically, first of all set CHAPTER
Whether a chapter mark is automatically inserted or not during a recording
pause is set with the AUTO CHAPTER (REC PAUSE) item.
ON : Insert a chapter mark.
OFF : Do not insert a chapter mark.
Notes
● When the INDEX CREATION item on the RECORDER MENU (2/2) screen
● The frame at which a chapter mark is inserted will be used for the
● Each title can contain up to 99 chapters.
● In certain cases, the frames used for chapter menu thumbnails may differ
● Indexes can be added or deleted when in the Playback mode.
Simply press the OPEN/CLOSE button and remove the disc. (Do not finalize
the disc before it is removed.)
* The AUTO FINALIZE item on the DISC menu screen will have to be set to
OFF.
Finalize the disc, press the OPEN/CLOSE button, and then remove the disc.
For more details regarding finalizing, refer to page 42.
CREATION to MANUAL.
Chapter marks and indexes can then be inserted by pressing the REC button
while recording.
CREATION to AUTO. Then use SET INTERVAL to set a time (in minutes) for
chapter mark insertion.
The DVD recorder will insert chapter marks and indexes at the corresponding
intervals during recording.
is set to AUTO, indexes will be inserted together with chapters at the
record start point and reording pause point.
corresponding thumbnail in the chapter menu. When EDIT MENU from
the DVD MENU screen is set to ENABLE, the frames used for thumbnails
can be modified on the THUMBNAIL EDIT screen that appears
automatically at the end of recording.
slightly from the exact frames at which the corresponding chapter marks
were inserted.
39
Advertisement
Table of Contents
