Table of Contents
Advertisement
Setup Menu
Setting the Setup Menu
Settings made in the setup menus are stored in this DVD recorder's internal memory and will be retained even when the power is
turned off. It is also possible to return to default settings whenever so required.
In addition to the buttons on the front panel, a keyboard can also be used to perform operations on these menus. The following
section, however, will describe operations performed using the front panel buttons.
Keyboard : Select using the arrow keys (∞ and √), and confirm the selection using the Enter key.
BUSY
Cursor buttons
OPEN/CLOSE
(6, 7, 8 and t)
OPTION DV Y/C LINE
SET UP
SET UP button
SET
TOP
MENU
MENU
SET button
Setup Menu
DISC
INPUT SELECT
SYSTEM
DVD MENU
RECORDER
REMOTE
DISPLAY
CLOCK ADJUST
NETWORK
EXIT
RECORDER MENU (1/2) screen
RECORDER MENU (1/2)
MENU
CHAPTER CREATION
SET INTERVAL
AUTO CHAPTER (RECPAUSE)
ENCODE QUALITY
AUDIO ENCODE
RECORDER MENU (1/2)
MENU
CHAPTER CREATION
SET INTERVAL
AUTO CHAPTER (RECPAUSE)
ENCODE QUALITY
AUDIO ENCODE
Restoring to Default Settings
SYSTEM MENU screen
SYSTEM MENU (1/2)
MENU
SETUP
TEST SIGNAL
FACTORY SETTING
KEYBOARD STYLE
PLAYBACK & 232C TYPE
TOTAL RECORDING TIME
58
Setup menu operations are carried out while monitoring the display on the monitor
connected to the VIDEO LINE OUT or Y/C OUT terminal. In addition, setup menu
content also appears on the LCD display.
Stop the DVD recorder.
1.
Open the Setup Menu screen.
To do this, press the SET UP button
2.
Open the setup menu in which settings are to be modified.
q Use the 6 and 7 buttons to select the required screen.
w Press the SET button
* The EXIT option can be selected to return to the normal screen display.
3.
Make the required settings in the setup menu.
q Use the 6 and 7 buttons to select the parameter to be set.
w Press the SET button
● A list of setting values will appear.
e Use the 6 and 7 buttons to select the required value from the list and then
press the SET button.
● The setting value will be modified accordingly.
r Repeat steps q through e until all of the required settings have been
made.
To return to the Setup Menu, select MENU and press the SET button.
To move to the next menu screen, select the † button at the top of the current
MANUAL
Every05Min
screen and press the SET button.
ON
To return to the original menu screen, select either MENU or BACK and press
SP
DOLBY DIGITAL
the SET button.
4.
Use either of the following methods to return to the normal screen
display.
Press the SET UP button.
or
Select EXIT from the Setup Menu and press the SET button.
MANUAL
AUTO
SP
DOLBY DIGITAL
Setting list
All settings from the various setup menus can be returned to the corresponding
default settings by setting FACTORY SETTING from the SYSTEM MENU screen
to EXECUTE and by then pressing the SET button.
OFF
* The current set values for the TV TYPE item on the SYSTEM MENU (2/2) screen
OFF
will not be erased.
EXECUTE
ENGLISH
DVD
5 Hour 30 Min
Settings
Advertisement
Table of Contents
