Preparing A Disc For Recording - JVC BD-X201M Instructions Manual

Preparing a Disc for Recording

This DVD recorder is capable of recording to DVD-R and DVD-RW (in video mode).
DVD-R : Only discs that conform with DVD-R Standard 2.0 (video mode) can be used.
DVD-RW : Discs of Version 1.1 or later can be used.
Although Version 1.1 of DVD-RW standards allows the selection of video mode and VR mode for recording, this
DVD recorder performs recording in video mode only.
* Version 1.0 of the DVD-RW standards does not support video-mode recording, and for this reason, the corresponding
discs cannot be used.
In terms of recording characteristics, DVD-R and DVD-RW (video mode) differ as follows.
DVD-R
DVD-RW (video mode)
The condition of the disc being used will dictate the available recording options as follows.
DVD-R
Blank disc
A disc recorded on using this DVD recorder
but not yet finalized.
DVD-RW Blank disc
A disc recorded on using this DVD recorder
but not yet finalized.
A recorded disc from which data is to be
erased.
Notes
● If data has been erased from a disc using a different DVD recorder, it may not be possible to record new content to it using
this recorder. To avoid this type of situation, ensure that this DVD recorder is used to erase recorded data.
● New content cannot be recorded to discs that have been finalized.
It is possible to cancel the finalization and add a recording to a DVD-RW finalized on this machine.
● Regardless of whether or not finalization has been carried out, it will not be possible to use this DVD recorder to record new
content to a disc that has been recorded on using other devices.
: Each disc can be recorded only once. Erasing of data and re-recording are not possible.
: After viewing a disc, all data can be erased and it can be used to record new content.
Disc condition Recording operations
New content can be recorded. A new title is created and recording
starts from that title's first chapter.
A new title is created in the unused section of the disc, and recording
starts from that title's first chapter.
New content can be recorded. A new title is created and recording
starts from that title's first chapter.
A new title is created in the unused section of the disc, and recording
starts from that title's first chapter.
Erase the recorded data (as described below), and then record
new content.
27