JVC BD-X201M Instructions Manual page 64

Hide thumbs Also See for BD-X201M:
Table of Contents

Advertisement

Playback
The title menu (TOP MENU) will appear
2.
Select the number of the title to be played.
Use the t, 8, 7, and 6 buttons to select the title number
for playback.
3.
Press the SET button to begin playback.
4.
Set to Still mode.
This is done by pressing the PAUSE button.
● The DVD recorder enters Still mode.
● If the PAUSE button is then pressed again in Still mode, the DVD recorder will advance playback by a single frame.
5.
Restart playback.
Press the PLAY button.
The DVD recorder will behave as follows when title playback has ended.
These actions will depend on the setting made for TITLE END from the DVD MENU screen during recording.
Set to MENU
Enters stop mode and the title
menu (TOP MENU) is displayed.
6.
Stop playback.
This is done by pressing the STOP button.
● The DVD recorder enters Stop mode.
● When the STOP button is pressed, the stop position will be registered and the next playback will start from the same position.
(Resume feature)
Clearing Resume Data
● When the STOP button is pressed while in the Stop mode, resume data will be cleared and the stop position will return to the
beginning of the first title.
● Resume data will be cleared upon ejecting the disc.
A Disc Set with No Menu
If a disc with DVD MENU TYPE item of the DVD MENU screen set to NONE is inserted, the title 1 will automatically play.
When the end of the title is reached the next title will be played.
Precaution regarding the playback
● During playback of a disc, if the input setting is DV then the sound can be delayed. In this case, change the input setting to LINE
or Y/C.
● If the disc is dirty or damaged good playback may not be possible. In this case either clean the disc or change it.
● When playing back an unfinalized disc containing mixed data such as screen aspect ratio of 4:3, squeezed, and letterbox
format or a menuless disc, the wide information is not always correctly output.
54
DISC IN ACTION setting made during recording
MENU
TITLE END item setting during recording
Set to REPEAT
Repeats playback within the
title.
Playback starts automatically from the first title.
Set to STOP
Enters the stop mode. The title
menu (TOP MENU) is not
displayed.
Stops at the beginning of the
first title.
TITLE
Set to NEXT TITLE
Next title is played. When
playback of the final title
finished, the first title is played.
(Disc repeat playback)

Advertisement

Table of Contents
loading

Table of Contents