Playback; Playing Back A Disc - JVC BD-X201M Instructions Manual

Playback

Playing Back a Disc

It is possible to playback a disc recorded on this DVD recorder.
Playback operation may vary according to whether finalization has been performed.
Playing Back a Disc before Finalizing
OPERATE
AUDIO
TITLE CHAPTER
CH1
DOLBY DIGITAL
LPCM MPEG
CH2
PHONES REV STOP PLAY FWD
STOP button
PLAY button
Clearing Resume Data
● When the PLAYBACK&232C TYPE item on
the SYSTEM MENU (1/2) screen is set to
DVD, resume data will be cleared and the stop
position will return to the beginning of the last
title if the STOP button is pressed when in
the Stop mode.
● When the PLAYBACK&232C TYPE item is set
to VTR, resume data will not be cleared even
if the STOP button is pressed when in the
Stop mode.
● Resume data will be cleared upon ejecting
the disc.
Playing Back a Finalized Disc
When a disc is finalized, its title menu will be used to create the top menu.
The action taken by this DVD recorder when a disc it has finalized is inserted or when playback of a title has ended will depend on
the settings of DISC IN ACTION and TITLE END as set on the DVD MENU screen during recording.
* Playback may not proceed smoothly with discs recorded using different devices, regardless of whether or not they have been finalized.
1.
Insert a disc.
Depending upon the DISC IN ACTION item settings of the DVD MENU screen during recording, the operation will differ.
Operate in accordance with the table below.
BUSY
OPEN/CLOSE
OPTION DV Y/C LINE
SET UP
SET
PAUSE REC TOP
MENU MENU
PAUSE button
OPERATE
AUDIO
TITLE CHAPTER
CH1
DOLBY DIGITAL
LPCM MPEG
CH2
PHONES REV STOP PLAY
STOP
PLAY button
Operation
1.
Insert the disc.
2.
Play the disc.
Press the PLAY button.
● The final title is played.
3.
Select still mode.
Press the PAUSE button.
● The machine enters still mode.
● If the PAUSE button is then pressed again in Still mode, the DVD
recorder will advance playback by a single frame.
4.
Restart the play.
Press the PLAY button.
Upon reaching a title end, it will automatically jump to the next title
and play back all titles.
When disc end is reached it will automatically enter stop mode.
Stop position may vary according to settings of the PLAYBACK&232C
TYPE item on the SYSTEM MENU (1/2) screen.
When set to DVD : Beginning of last title
When set to VTR : 3 seconds before end position
5.
To manually stop playback press the STOP button.
When the STOP button is pressed, the stop position will be registered
and the next playback will start from the same position. (Resume feature)
BUSY
OPEN/CLOSE
OPTION DV Y/C LINE
SET UP
SET
TOP
FWD PAUSE REC
MENU MENU
SET button
PAUSE
Cursor buttons
53