Table of Contents
Advertisement
0
DV IN/OUT terminal
This I/O terminal for digital signals conforms with IEEE1394
specifications.
● In order to select this terminal's audio and video signals for
input, set INPUT SELECT from the INPUT SELECT MENU
screen to DV.
● REMOTE SELECT from the REMOTE MENU screen is
used to select a control method for this terminal as follows.
DV(SLAVE)
: The DVD recorder operates as a slave
device and is controlled by commands
from a master device.
DV(TRIGGER) : The DVD recorder performs recording
in response to operation of the trigger
button on a camera capable of DV
triggering (i.e., a GY-DV5000 from JVC).
!
FOOT SW 1/2 terminal
FOOT SW 1 : For controlling the Record/Record Pause
functions of this unit by connecting to an
external switch (foot switch, etc.).
FOOT SW2
: For adding chapters or indexes according to
switch signals by connecting to an external
switch (foot switch, etc.).
For selecting the method of control by this terminal using the FOOT
SW1/2 items on the REMOTE menu screen. ( Page 69)
@
FOR SERVICE terminal (RJ-45)
● Connect this terminal to a PC that has been installed with
utilities for this unit, such as application software for creating
title/chapter menus.
● NETWORK settings must be carried out using the
NETWORK MENU screen
#
Optional-board slot cover
This cover is removed to allow commercially-available optional
boards to be installed.
$
Equipotential Terminal
Ensure proper connection of the equipotential terminal for
each device when connecting this unit to other devices.
%
AC IN terminal (3P)
For connecting to the power outlet using the power cord
supplied.
^
MAIN POWER switch
Switch for turning ON/OFF the power.
● When the power is turned ON, operating mode can be
selected using the AC IN MODE item on the SYSTEM
MENU (2/2) screen. ( Page 64)
13
Advertisement
Table of Contents
