Table of Contents
Advertisement
REMOTE MENU Screen
The following table identifies and describes the parameters that may be set using the REMOTE MENU screen.
Top half
: Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ]
: Default setting
Parameter
Possible settings
REMOTE SELECT
DV(TRIGGER)
REMoTE
REC CONTROL
REC
FOOT SW1
LOW EDGE
HIGH EDGE
LOW LEVEL
FSW1
FOOT SW2
LOW EDGE
HIGH EDGE
BOTH EDGE
FSW2
232C
BAUDRATE
Bps
[OFF]
This parameter is used to select a method for controlling external devices connected
DV(SLAVE)
via the DV IN/OUT terminal).
OFF
DV (SLAVE)
[oFF]
dVS
dVT
DV(TRIGGER) : This setting is made when this DVD recorder is connected to a DV
[OFF]
This parameter is used to indicate whether or not the REC CONTROL panel is to be
ON
displayed on the monitor screen.
ON
: The REC CONTROL panel is to be displayed only when a recordable disc
[oFF]
oN
OFF : The REC CONTROL panel not to be displayed.
[OFF]
Set this item when connecting an external switch (foot switch, etc.) to the FOOT
SW1 terminal.
Set this unit to the Record Pause or Recording mode when using an external switch
(foot switch, etc.) in the LOW EDGE or HIGH EDGE setting.
OFF
[oFF]
LOW EDGE : Switch between recording and record pause actions using the low
LE
HIGH EDGE : Switch between recording and record pause actions using the high
HE
LL
LOW LEVEL : Use the low level and high level of external switch signals for recording
Set this item when connecting an external switch (foot switch, etc.) to the FOOT
[OFF]
SW2 terminal.
OFF
LOW EDGE : Add chapter marks and indexes using the low edge of external switch
HIGH EDGE : Add chapter marks and indexes using the high edge of external switch
[oFF]
LE
HE
BOTH EDGE : Add chapter marks and indexes using the low and high edges of
bE
For setting the communication speed of the RS-232C terminal.
[9600]
9600 : Communicate at a rate of 9600 bps
19200
19200 : Communicate at a rate of 19200 bps
[96]
192
: Control is not to be carried out via the DV IN/OUT terminal.
This is the standard setting for normal operation.
: This DVD recorder will become the slave device and will be
controlled by the master device.
camera featuring a DV record triggering function, and it allows
this DVD recorder to record video from the camera in response to
operation of its trigger button.
has been inserted and the DVD recorder is in Stop, Recording, or Recording
Pause mode.
: Set to this when an external switch is not used
edge of external switch signals
edge of external switch signals
and record pause respectively
: Set to this when an external switch is not used
signals
signals
external switch signals
Description
69
Advertisement
Table of Contents
