Table of Contents
Advertisement
Setup Menu
SYSTEM MENU (2/2) screen
Parameter
Possible settings
AC IN MODE
[POWER ON]
POWER OFF
AC
SYNC SYSTEM
SYNC
TV TYPE
TV
VBID OUT (WIDE)
Vbid
Y/C TERMINAL
MODE
Y C TM
OPERATION
LOCK
oPLoCK
BACK
bACK
64
For selecting whether to start up in the Operate ON or OFF mode when the MAIN
POWER switch at the rear of this unit is turned ON.
POWER ON : Start up in Operate ON mode
[oN]
POWER OFF : Start up in Operate OFF mode
oFF
[AUTO]
For selecting the synchronization method for this unit.
INTERNAL
AUTO
INTERNAL : Set to internal synchronization
[AUTo]
INTE
[NTSC]
For selecting the signal system during recording and playback.
PAL
NTSC : When recording/playing back in the NTSC mode
PAL
: When recording/playing back in the PAL mode
[NTSC]
PAL
This unit will automatically be rebooted when this setting is changed.
Upon reboot, all menu items except the date/time data and hour meter will be
restored to their default values.
For selecting whether to add the JCPX-1204 standard-compliant VBID (Video Blanking
[OFF]
ON
ID) signals to the analog video signals output from this unit. (NTSC only)
OFF : Do not add VBID signals (Copyguard signals will be added.
[oFF]
ON : Add VBID signals
oN
This parameter is used to set the specification for the DVD recorder's VIDEO Y/C
[S1]
S2
INPUT and OUTPUT terminal in order to enable the recording of wide-screen
discrimination signals.
S1 : S1 terminal mode is to be adopted. A discrimination signal for normal video
with a 4:3 aspect ratio and squeezed video is to be recorded.
[S1]
S2 : S2 terminal mode is to be adopted. A discrimination signal for normal video
S2
with a 4:3 aspect ratio, squeezed video, and letterbox video is to be recorded.
Squeezed video : 16:9 wide-screen content with the left and right sides
Letterbox video : Content with the top and bottom of the screen blackened out.
[OFF]
For selecting whether to enable operation lock.
ON
OFF : Operation lock turns OFF and all operation buttons on the main unit are enabled
ON
: Operation lock turns ON and operation buttons on the main unit are disabled
However, the CLOSE/OPEN, SET UP, SET and cursor buttons will not be
[oFF]
oN
disabled.
Returns to the SYSTEM MENU (1/2) Screen
Description
: Switches automatically between internal and external synchronization
compressed for normal aspect screens.
Advertisement
Table of Contents
